Rafiki Twinflex PLUS 4 Zone Kit
- The Twinflex starter kit simplifies the equipment selection and offers a good starting point for a small installation.
- Everything needed to begin an installation in one boxed kit.
Kit Contents

• 6 Twinflex Multipoints with integral sounder
• 2 Surface or Flush Call Points
• 1 Head Removal Tool
• 4 zone plus panel
• Battery Requirements 72hr: 2 x 2.1Ah 12v (not included)

How Does The TwinFlex Work
- At the planning stage, fire zones are designated as either "Dwelling" or "Communal". Multipoint detectors in the dwelling zones have the facility to use "checkpoint" technology - see Feature Article: "Checkpoint Technology Filters Nuisance Alarms on Conventional System"
- "Checkpoint" technology is the ability to select a checking period for individual detectors to confirm the smoke/heat detected as a genuine fire not an unwanted alarm.
- This checking period can be selected between 1 - 8 minutes at commissioning stage after consultation with fire officers or other authorised bodies.

• Two wire installation plus all the features of the standard Twinflex system.
• Programmable (1-5 minute) automatic detector alarm confirmation in dwelling zones.
• Local sounder operates while detector alarm is confirmed.
• Full alarm when detector alarm confirmed.
• Immediate full alarm when fire detected in communal areas.
• Multipoint detector offers 7 modes of detection.
• Built-in sounder with 92dBA output.
• All devices have built-in EOL monitoring.
• Callpoint identification.
• EN54 compliant.
• Eliminates disruption of nuisance alarms.
• Perfect solution for BS5839 pt 6 (HMO's).
• No need for mixed systems.