Bardic 1-8 Zone Fire Alarm Control Panel ZIRCON2 [FX8ZONE] : Sparks Direct, Lighting and Electrical Wholesaler

Home > Fire and Security > Fire Alarms > Conventional & Analogue Systems > Bardic 1-8 Zone Fire Alarm Control Panel ZIRCON2

Click on image to zoom in

enlarge image in popup

Model: FX8ZONE

policy (Exceptions and Terms &
Conditions apply. View.)

Bardic 1-8 Zone Fire Alarm Control Panel ZIRCON2

Product Specifications:

Zone: 1-8.
Device loading Per Zone: Maximum quiescent current of 1.2mA per zone (most detectors 20).
Monitoring: Zone & Alarm circuits, Alarm Silenced, CPU fault, System test, and PSU fault.
End of Line Device: Sounder: 8k2 ohm resistor Zone: Active end of line module is required instead of resistor, if removable detectors are fitted (ZF19 End of Line Module supplied with Panel).
Number of Alarm Lines: 2 Circuits.
Alarm Circuit Load: 800mA total load.
Supply Voltage: 230 Vac ± 10% 50 Hz.
Operating Voltage: 24 Vdc.
Controls: Keypad.
Indication: Panel indicators.
Battery: 24 Hour standby 1 x 12V 7.0 Ah Fuse rating F6.3A.
Standby Period: 24 Hrs.
Recharge Period: 24 Hrs.
Repeater Output: Common fire and fault plus individual zone fire and faults.
Auxiliary Contacts: Auxiliary contacts (NO/NC/COM) rated at 1A 30 Vdc.
Auxiliary 24V Supply: 50mA maximum This is specifically not for fire protection devices Nominal voltage 25V (±1V). Fuse rating F100mA.
IP Rating: IP30.
Operating Environment: 0 - 30ºC.
Construction: Painted sheet steel back box fitted with a flame retardant polycarbonate facia with 13 x 20 mm knockouts – top, 13 x 20 mm knockouts – rear.
Weight: 6Kg (including 7.0Ah battery) approximately (supplied).
Dimension: (W) 324mm x (H) 267mm x (D) 74mm.