CP Electronics SPIR-F/C Ceiling Mounted Presence Detector, 10A ceiling PIR

The SPIR-F/C ceiling mounted presence detector can be easily mounted onto a single gang standard switch box either surface or flush mounting. The SPIR-F/C presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. They detect movement using a PIR sensor and turn the load on. When an area is no longer occupied the load will switch off after an adjustable time out period. An adjustable internal light sensor provides additional energy saving in lighting applications. When the unit is first powered up the PIR sensor will always detect immediately regardless of whether the room is occupied.

Features

• Load taken:
  # 16 Amp resistive load
  # 10 Amp incandescent lighting
  # 6 Amp fluorescent lighting
  # 3 Amp compact fluorescent lighting
  # 3 Amp low energy lighting
  # 3 Amp low voltage lighting (switch primary of transformer)
  # Fluorescent lighting (max 6 fittings recommended)
  # For fluorescent lighting total power factor correction capacitance must not exceed 40microF.
  # 3 Amp fans and ventilation equipment
  # Switch SON lighting loads via a contactor
• Supply Voltage: 220-240 Volts AC 50 Hz
• Time out period: Adjustable 10 seconds to 30 minutes
• Light Level: Light to dark.
• Fixing Method: Surface fixing 25mm deep plastic surface mount moulded box. Flush fixing 25mm steel wall box or 32mm deep cavity wall box.
• Terminal capacity: 4.0mm2
• Material: Flame retardant ABS
• Class 2 electrical rated
• Temperature: -10°C to 35°C
• Conforms with: EMC-89/336/EEC, LVD-73/23/EEC