Featured Products

The Columbus 400A timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button switches the contacts and activates the time delay, which can be set at installation anywhere between 10 seconds and 10 minutes. The unit has normally open or change over contacts as standard and can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways and storerooms. The Columbus 400 offers a variety of options for either installation or replacement of existing single gang switches for use on incandescent, fluorescent or compact fluorescent lighting applications. Features

• For fluorescent and incandescent lighting
• Available in white finish
• Replaces existing single gang wall switch
• Configuration: Normally Open contact arrangement
• Finish: white
• Rating(max. load): 3-6Amp
• Description: Push Button Timer
• Options: SPCO
• Incandescent: 6A
• Fluorescent: 3A
• Compact Fluorescent: 3A (6 Fittings max)
• Adjustable Timing Range between 10 seconds and 10 minutes
• No Neutral Required
• Compatible with 20mm deep single gang BS accessory plate
• For use on flush mounted applications.

Note: Can be made splash proof by the fitting of a rubber shroud and gasket kit (not supplied) - Elkay Part No. 163. When fitted, the switch can be suitable for damp areas.

Manufactured by GET.

Airflow iCON15, the new face of ventilation. Recessed into the wall or ceiling, the powerful axial fan is a stylish, slim and unobtrusive fan for toilets, en-suites, bathroom and shower rooms. A quick, 4" core drilled hole enables immediate fixing of iCON 15. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces. The snap-in module is quick to fit and wire. Tiling is a breeze with the circular cover flange, reducing the need to make good and one wipe and the cover is clean. Product Features:

• Quiet, stylish, slim and unobtrusive in walls or ceilings.
• Unique iris shutter, prevents back draughts, operates silently and helps reduce noise ingress.
• Meets Building Regulations, Approved Document F, April 2006, for extract fans.
• TÜV, BEAB approved.
• Continuous ventilation fan, adjustable 8 l/sec and 13 l/sec extraction.
• Splashproof, tiling friendly, wipe clean cover.
• The iCON 15 is supplied for remote switching. Matching the required control functions (pull cord, timer, humidity, PIR, two speed) to the installation, simply means plugging in an interchangeable module into the iCON15 fan.
• Three year ‘no quibble’ guarantee.

Product Specifications:

• Ductable: Up to 4m.
• Power: 14.5W/230V.
• IP Rating: IPx4.
• Air Flow: 21 l/sec (76m3/hr).