Airflow iCON15, the new face of ventilation. Recessed into the wall or ceiling, the powerful axial fan is a stylish, slim and unobtrusive fan for toilets, en-suites, bathroom and shower rooms. A quick, 4" core drilled hole enables immediate fixing of iCON 15. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces. The snap-in module is quick to fit and wire. Tiling is a breeze with the circular cover flange, reducing the need to make good and one wipe and the cover is clean. Product Features:

• Quiet, stylish, slim and unobtrusive in walls or ceilings.
• Unique iris shutter, prevents back draughts, operates silently and helps reduce noise ingress.
• Meets Building Regulations, Approved Document F, April 2006, for extract fans.
• TÜV, BEAB approved.
• Continuous ventilation fan, adjustable 8 l/sec and 13 l/sec extraction.
• Splashproof, tiling friendly, wipe clean cover.
• The iCON 15 is supplied for remote switching. Matching the required control functions (pull cord, timer, humidity, PIR, two speed) to the installation, simply means plugging in an interchangeable module into the iCON15 fan.
• Three year ‘no quibble’ guarantee.

Product Specifications:

• Ductable: Up to 4m.
• Power: 14.5W/230V.
• IP Rating: IPx4.
• Air Flow: 21 l/sec (76m3/hr).

Columbus 400 series push button timer with a time range of 10 sec - 10 min. Key Features:

• No Neutral Required.
• For Fluorescent & Incandescent Lighting.
• Adjustable Timing Range between 10 seconds and 10 minutes.
• Compatible with 20mm deep single gang BS accessory plate.
• Can replace existing single gang wall switches.
• Approved to BS EN 60730-2-7.

The Columbus 400 offers a variety of options for either installation or replacement of existing single gang switches for use on incandescent, fluorescent or compact fluorescent lighting applications. Pushing the button switches the contacts, and activates the time delay. The unit has Normally Open and Normally Closed contacts as standard.The unit is supplied with M3.5 fixing screws and blanking plugs to cover the screw heads as standard. For use on flush mounted applications. Can be made splash proof by the fitting of a rubber shroud and gasket kit (not supplied) - Elkay Part No. 163. When fitted, the switch can be suitable for damp areas.

Manufactured by GET.