Lutron Dimming Interface 5A capacity, GRX-TVI Ten Volt Interface [GRXTVI] : Sparks Direct, Lighting and Electrical Wholesaler

Home > Dimming Systems > Lutron > Lutron Grafik 3000 Series > Lutron Dimming Interface 5A capacity, GRX-TVI Ten Volt Interface

Click on image to zoom in

enlarge image in popup

Model: GRXTVI

policy (Exceptions and Terms &
Conditions apply. View.)

Lutron Dimming Interface 5A capacity, GRX-TVI Ten Volt Interface

Lets a Control Unit switch and dim fluorescent lights that have Lutron Eco-10TM (TVE Series) Electronic Dimming Ballasts.
More features

Switches and dims any 0-10V electronic fluorescent dimming ballast powered by 100-277V (ballast must source/provide 10V supply). Switches up to 10A of electronic capacitive fluorescent ballasts.
Also switches motors – 1/4HP @ 100-127V, 1/2HP @ 200-277V.
Lets you connect up to five Ten Volt Interfaces to one Control Unit zone. This allows one zone to control up to five 16A circuits of Eco-10TM (TVE Series) Electronic Dimming Ballasts or five motors.
Provides 100-277V power to loads.
Requires 100-127V or 200-240V power for internal operations.

Technical Specs

Power
- Load (output) power: 100-277V. Phase independent of lighting control.
- Control circuit: 40W/VA @ 100-127V or 200-240V, 50/60Hz, same phase as lighting control. Provides power for internal operations.
O-10V Dimming Control
Output rating: 10 microA-300mA.
Sinks current only (ballast must source/provide 10V supply).
Zone Capacity
Up to five Ten Volt Interfaces per Control
Unit zone.
Key Design Features:
- Complies with standard UL 508.
- Provides a Class 2 isolated 0 -10V output signal that conforms to EN60929 and IEC929.
- Accepts a constant-gate drive fluorescent signal (100 -127V or 200 -240V; 50/60Hz).
Terminals: Up to two #12 AWG (2.5mm2) conductors.
Physical Design:
- Wall-mounted. Indoor use only. Type 1 enclosure.
- Weight: 4.25 pounds (2kg).
Environment: 32-104°F (0-40°C). Relative humidity less than 90% non-condensing.

VAT: ON / OFF

Your cart is empty.