Lutron Grafik Integrale 4 Zone Control Unit [GXI3104] : Sparks Direct, Lighting and Electrical Wholesaler

Home > Dimming Systems > Lutron > Lutron Grafik 3000 Series > Lutron Grafik Integrale 4 Zone Control Unit

Click on image to zoom in

enlarge image in popup

Model: GXI3104

policy (Exceptions and Terms &
Conditions apply. View.)

Lutron Grafik Integrale 4 Zone Control Unit

Controls four zones of lighting. GXI-3104 Control Unit allows setup of lighting scenes using buttons on the Control Unit.

Provides push-button recall of four preset lighting scenes.
Controls virtually any light source without an interface.
Provides lockout options to prevent accidental changes.
Includes built-in infrared receiver for operation
Input Power: 230V (CE), 50Hz.
Dimmed / Switched Live Output: 800W/VA
Ballast Control Output: up to 20 ballasts
Lightning Strike Protection: Can withstand voltage surges of up to 6000V and current surges up to 3000A.
Sources/Load Types: Operates these sources with a smooth continuous Square Law dimming curve or on a full conduction non-dim basis: Incandescent, Electronic low voltage, Magnetic low voltage, Neon and cold cathode
Environment: 0-40°C. Relative humidity less than 90% non-condensing.
Controls any light source: Incandescent/Tungsten, Electronic Low Voltage, Fluorescent, Magnetic Low Voltage, Neon, Non-Dim.
Finish: white with translucent control unit cover.
Wallbox size: 200mm x 95mm.

Lutron Integrale Preset Controls

4 preset lighting scenes and off for 4 zones, accessible from Control Unit faceplate.
12 additional scenes stored in Control Unit, accessible via Wallstations and/or Control Interfaces.
Light levels fade smoothly between scenes. Fade time: 0-59 seconds or 1-60 minutes. Can be set differently for each scene.

Lutron Integrale Key Design Features

Meets IEC 801-2. Tested to withstand 15kV electrostatic discharge without damage or memory loss.
Provides over current and short-circuit protection.
Has a trimmable High End and Low End.
Manual or automatic selection between leading edge or trailing edge dimming for low voltage transformers.
Provides air gap isolation when the Off scene is selected.
Provides 10-year power failure memory: Automatically restores lighting to levels prior to power interruption.
Has faceplate that snaps on with no visible means of attachment.

VAT: ON / OFF

Your cart is empty.