Rako RAH-SMART handheld remote control, programmable colour display remote controller

Rako RAH-SMART handheld remote control - what is it?
The RAH Smart hand controller offers a stylish handset with colour display screen to give more user information and flexibility. The handset can be used in multiple rooms, selectable from the menu and allows Room, Scene and Channel naming. Curtain and blind controls with open/closed and individual blind control options are also available on screen.
The controller is shipped with factory default settings. It will need to be programmed to operate correctly with your specific RAKO system. The RAH Smart can be programmed manually using it’s keypad with these instructions. More normally, the RAH Smart will be pre-programmed by the system installer through the USB interface.
The way the Rako RAH-SMART handheld remote control operates
Typically, the controller will be used to control lights in one or more rooms. The controller can issue “scene” commands that recall preset light levels for each dimmer; or can control individual circuits separately. The controller can also be used to open and close curtains and blinds. In this case, the curtains and blinds have been programmed to a different logical “room” to that used by the lights. The lighting “room” and the curtains “room” can be combined using the “group setup” menus. Once this is done, the shortcut key on the side of the controller can be used to make quick switch between lighting and curtain control
With a bright OLED colour display giving feedback of room, scene and circuit descriptions; simple, effective and complete control of all Rako devices is possible. The unit can be configured either manually using the on-screen prompts or with the RASOFT programming software. Using the relavent RF interfaces the RAHSMART can also be used to control window treatments with the Rako RACUB module and multiroom audio systems with the appropreate interface module. RAKOM coded radio transmission eliminates the need for direct line of sight to the dimmers or wall plates, unlike infrared based systems. Key Features Control of up to 64 rooms is possible from a single remote. Power is provided by three AAA or LR03.