Rako RDF800-C Ceiling Light Dimmer 0-10V fluorescent, wireless lighting controlled light dimmer

This is a compact 800w RF dimmer for 1-10v analogue fluorescents. The unit is connected in-line before the first light fitting, to enable dimming of up to 800w of 1-10v dimmable loads. Can also be used for other 1-10v control applications, such as fibre optic projectors and analogue controlled LED transformers. Controlled from any Rako RAKOM RF device, for example the RCP07W push button RF wall plate.

Programmed using either an RCP07 RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus four preset scene levels in non volatile memory.
The RDF800C dimming module can be controlled from any Rako transmitter such as RCP wallplates, RAH hand helds, MB1 timeclocks and forms the foundation of any Rako scene-set system.

The Rako RDF800-C Dimmer - Technical Data

• dimensions: 160x50x36mm
• input supply: 230V AC +/-10% 50Hz
• weight: 230g
• housing: UL V0 material
• 0-10V Fluorescent or LED, 800W ceiling mount dimmer external aerial
• The RDF800C in-line RF 800w dimmer for 1-10v dimmable fluorescents
• Fluorescent and Switching Control Modules
• climate range: Temperature +2C to +40C
• Humidity: +5% to 95% non condensing
• connections: 4 way screw terminals for mains power, 2 way screw terminals for ELV output
• protection: Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection
• load types: 1-10v analogue dimmable fluorescents, 0-10v controllable fibre optic projectors, 0-10v controllable LED transformers
• minimum load: none; maximum load: 800w
• terminal sizes: 2.5mm2
• standards: EMC - EN 5001-1 :1992, Immunity - EN 50082-1 :1997
• communication: Rakom coded fm radio, 433.9MHz
• memory: Flash memory (non volatile)