Vent-Axia Silhouette 100 bathroom fan ~ S100SVT / 439975, 100mm low voltage fan with integral adjustable electronic overrun timer

The Vent-Axia S100SVT is a Low Voltage Silhouette Fan from Vent-Axia - Single speed 100mm bathroom/toilet fan with integral adjustable electronic overrun timer (up to 30 mins), neon running light and backdraught shutter.
The Silhouette SELV 12 range from Vent-Axia is a 100mm extract fan for domestic bathrooms and WC’s available as wall or panel mounted models. Model options with shutter, timer and auto humidity control.
The Silhouette SELV range is designed for modern living. With a slim profile of only 17mm, Silhouette blends in with the wall surface to provide an unobtrusive installation. Silhouette has a FID performance of 26l/s, and is double insulated, with a power consumption only 18 watts. Careful design means a ‘white sound’ spectrum understates the dB(A) sound levels providing optimised sound to performance output.
Mounted in the centre of the fan, beneath the ultra slim profile grille, are the electronics, incorporating a choice of integral control, a humidistat for detecting a change in internal humidity or an overrun timer option that is adjustable between 5 and 30 mins. Silhouette can be ceiling/panel mounted and connected to an appropriate duct run to the outside.

Low Voltage Silhouette 100mm Bathroom Fan - Features

• Supplied with a transformer (W x H x D) 147 x 86 x 65mm
• 17mm actual profile
• Backdraught prevention vanes fitted on discharge
• The electrical supply to this fan is 12V AC SELV from the mains controller. This means that the fan may be installed within reach of a person using a fixed bath or shower, i.e. in a nearby wall. However, the fan must not be placed where it could be submerged in water or regularly exposed to direct water spray, e.g. from a shower head whether permanently fixed or movable
• Air extracted: 95m3 per hour; 26l/s;
• Power Consumption: 18W;
• Quiet Fan: 37dB(a)@3m;
• Isolating transformer with a 12V output;
• IP rating: IPX7 rated fan;
• 17mm stylish ultra low profile grille;
• Downstream airflow guide vanes for improved pressure development;
• Ball bearing motors for vertical or horizontal application;
• Low power consumption;
• Integral humidity and timer controls;
• Suitable for wall and panel mounting only;
• Can be installed at any angle;
• If ceiling mounted, 3m maximum of rigid ducting should be used with a condensation trap;
• Dimensions: 160mm width, 99mm fan diameter, 77mm depth under the cover, 90 total depth;
• Manufacturer: Vent-Axia, model: Silhouette 100SVT, Vent-Axia 439975