1 Gang 2 Way 10-120W LED Dimmer Screwless Matt Black Plate (Trailing Edge), Mode Black
£47.01
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Heritage Brass YBK.560.TED, a 1 Gang LED Dimmer in Matt Black Screwless Plate with Black Insert, part of the Mode Black range of switches and sockets in a black powder coated finish.
The Heritage Brass Mode Black range of switches and sockets is a low profile range of wiring accessories of the highest quality coming in a matt black fine textured finish and using Wandsworth black electrical inserts that match them. The Mode Black range in particular are elegantly styled, slim, and have a modern profile with concealed fixings (screwless, that is, no screws are visible on the plate) and use a grid system construction.
They are a great solution for a sophisticated or modern installation specified by the architect and interior designer. The operating voltage for this range is 250V 50Hz, the front plate is plain screwless in a black powder coated finish, and the electrical inserts are black. It conforms to the relevant British wiring Standards.
1 Gang 2 Way 10-120W LED Dimmer Screwless Matt Black Plate - Specs
- This item is part of the Heritage Brass Mode Black Range - Matt Black plate, screwless, rounded corners.
- 1 Gang LED Dimmer - YBK.560.TED
- It uses a Varilight V-Pro LED dimmer module, trailing edge, and can dim good quality dimmable LED lights up to 120W.
- It takes max. 10 LED lamps per module / gang.
- Wattage: min. 10W, max. 120W per module / gang.
- Suitable for most quality dimmable LED lamps (compatibility is not guaranteed with all LED lamps).
- Back box depth: 35mm
- Range: part of the M-Marcus (Heritage Brass) Mode Range
- Product code range: Mode Black YBK
- Type: 1 Gang LED Dimmer
- Plate Finish: Matt Black
- Switch finish: Black
- Body and Switch Trim: Black
- Height: 88 mm
- Width: 88 mm
- Fixing Hole Centres: Box Fixing = 60.3 mm
- Minimum Box Depth: 35mm
- Voltage: mains voltage 230 V
- Power Max: 120W - 10 Lamps Trailing Edge
- Terminal Capacity: 4 mm2
- Earth Terminal Capacity: 5 mm2
- Product Electrical Class 1: Face plate must be earthed
- Ambient Operating Temperature: -5°C - 40°C
- Recommended Location: Indoor use only
- Standard: BS EN 55014, BS EN 60669-2-1
Note: picture is for illustrative purposes only; please take a look at the full specifications of this device.
| Switches & Sockets Specific | |
| Back Box Depth | 35mm |
| Brand | Heritage Brass |
| Finish | Black |
| Gang | 1 |
| Insert | No Insert |
| Plate | Metal |
| Plate Dimensions | 88mm x 88mm |
| Style | Flat plate |
| Type | LED Dimmer |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
