1 Gang Double Pole Dolly Switch in Stainless Steel Plate and Dolly from Forbes and Lomax

This is the Forbes and Lomax 1GDP/SS, a one gang double pole dolly switch coming in stainless steel, manufactured by Forbes and Lomax. At only 1.8mm thick the brushed stainless steel plates sit flush with the wall and suit contemporary interiors or kitchens.

The wide range of socket outlets that we offer include a selection of network and audio visual sockets to suit the needs of the most high-tech installations. A whole array of fused connections and cooker switches provide all you need to control the power of your kitchen appliances.

• All dolly switches fit into standard 35mm deep wall boxes (with the exception of the architrave switch, which requires a special wall box).
• This is a standard 1 way dolly switch - double pole switch used for higher loads. One way switching can control a lighting circuit from only one location, while two-way switching allows you to control a lighting circuit from two locations.
• Type: 1 gang 1 way DP dolly switch
• Finish: stainless steel plate and dolly switch
• Plate: flat plate

The Forbes and Lomax Dolly Switch

The Forbes and Lomax Dolly Switches are On/off Switches available in 2-way, Intermediate and double pole versions. Retractive dolly switches can be used as dimmer controllers when connected to a dimmer pack or dimming system. 2-way-and-off switches can be used to operate blinds.

The Forbes and Lomax dolly switches can be mixed with Button Dimmer Controllers on the same plate, however they can not be combined with rotary dimmers. The Forbes & Lomax dolly switches are available in: the Invisible Lightswitch® Range, the Antique Bronze Range, the Stainless Steel Range, the Aged Brass Range, the Unlacquered Brass Range, the Nickel Silver Range, and the Verdigris Range.

Technical Information - Forbes and Lomax Dolly Switch

• The Forbes and Lomax Dolly Switch Conforms to BS EN 60669 - 1: 1999 when assembled to appropriate plate and grid and
• installed correctly. ASTA Certificate No: 16240
• All Forbes and Lomax dolly switches require British standard 35mm deep flush wall boxes (to be ordered separately).
• Voltage: 250V AC, 50Hz
• Current rating: 20AX
• Terminal capacities: 4 x 1mm2 (Flex), 4 x 1.5mm2 (Solid), 3 x 2.5mm2 (Solid), 2 x 4mm2 (Solid), 1 x 6mm2 (Solid). 
• Ambient Operating Temperature: -5 degrees to +40 degrees Celsius
• IP rating: IP2XD
• Max. installation altitude: 2000m
• No. of operations: 10.000 
• Dimensions: 1-2 gang rocker switch 86mm x 86mm; 3-4 gang 146mm x 86mm.