100A 2 Pole Mains Isolator Switch with White Plastic Enclosure for Isolation between DNO and Consumer Unit

This is the BG Electrical CUEMS1-01, a 100A rated 2 pole mains isolator switch offering a point of isolation between the distributing network operator (DNO) meter and the Consumer Unit, so that the main fuse doesn't need to be removed and the incoming supply to the property can be isolated safely. It has a two-part cover; the bottom incoming terminals can be lead-sealed off to stop unauthorised access once installed.

A 100A rated 2 pole isolating switch capable of taking 25mm incoming tails.

100A 2 Pole Mains Isolator Switch with White Plastic Enclosure - Features

• Positive contact indicator
• Two part cover
• Safety screw with hole
• Switch can be locked in the ON or OFF position using a device lock (CUA10)
• Two cable entry and exit points at top and bottom of enclosure
• 4 fixing points
• To go between the meter and the consumer unit
• Allows the power to be isolated easily without removing main fuse
• Two part cover to isolate incoming terminals
• Safety screw allowing wire seal to secure bottom cover
• Two individual apertures in the top and bottom of the enclosure to effectively manage cable in and out
• Populated with 100A Main Switch, CUSW100
• Positive contact indicator: Green visible window indicates a 4mm contact gap
• Two part cover: Bottom incoming terminals inaccessible once installed without removal of safety seal
• Safety screw hole: Allowing the insertion of a safety lead seal
• Switch can be locked in the ON or OFF position using a device lock (CUA10): Allowing for safe isolation of device
• Two cable entry and exit points at top and bottom of enclosure: Allowing for easy cable management and undue stress to the cables and connections
• 4 fixing points: 
• For positive installation to the mounting surface

100A 2 Pole Mains Isolator Switch with White Plastic Enclosure - Specs

• Standard(s): EN/IEC 60947-3
• Rating: 100 Amp
• Rated Voltage: 230V a.c. 50Hz
• Utilisation Type: Type AC-22A
• Rated short circuit withstand current lcw: 12le, t=0.1s
• Rated short circuit making capacity 1cm: 20le, t=0.1s
• Rated making and breaking capacity: 3le, 1.05Ue, COSØ=0.65
• Insulation Voltage Ui: 690V
• Rated impulse withstand voltage Uimp: 4000V
• Nº of poles: 2
• IP rating: IP20 rated
• Terminal capacity: 35mm2
• Terminal torque: 3.5NM
• Installation: Mounting on 35mm DIN rail
• Size: 35mm width
• Endurance operations: Mechanical 10,000, Electrical 1,500
• Dimensions: 146mm x 50mm x 80mm