10kW Industrial Fan Heater (3 Phase no Neutral) for Heating Industrial Premises BN Thermic OUH2-10

This is the BN Thermic OUH2-10 - a 10kW Industrial Fan Heater (400V/3 Phase no Neutral) ideal for Heating Industrial Premises.

The OUH2-10 Industrial Fan Heater, brought to you by renowned specialists in electric heating BN Thermic, provides an extremely effective manner of heating your industrial premises. It procures 10kW standard heat output, and is built for utter convenience within industrial environments such as warehouses, factories and workshops. 

It features a uniquely designed wall bracket that allows for it to be mounted vertically, and can be wall or ceiling mounted so its strong heat output can be directed where it is most needed.

Multiple features ensure that this model is the perfect industrial heater, with temperature control configurable to either a factory-fitted thermostat or remote mounted thermostats. An optional switch is available that provides you with the standard on/off/heat as well as ‘fan-only’ option if you are looking to conserve on energy in your working environment. The BN Thermic OUH2-10 is also enabled to control multiple heaters from one point by a single control switch, which could be especially useful in huge industrial complexes such as warehouses. 

The BN Thermic OUH2-10 is constructed from a heavy gauge steel structure, while the motor is mounted in a ‘cool’ compartment, with a thermally protected motor, that reduces the risk of overheating. It includes protection devices such as the high-limit temperature control with automatic reset and a heat purge device that will expel all residual heat. Meanwhile, the heating element is fashioned in a concentric formation that optimises heat transfer and is encased safely within a stainless steel sheathed tube. 

BN Thermic 10kW Industrial Fan Heater - Features

• Power: 10kW 
• Input supply: 400v ac 3Phase (no neutral)
• Airflow: 1100m3/h
• Approximate temperature rise: 25 degrees Celsius
• Colour: Light grey case with black grille and bracket
• Approx. sound output: 60db at 2m (Noise levels are factory tested, not laboratory tested)
• Finish: Epoxy polyester powder coating
• Construction: 1.2mm steel case
• The Fan: Motor mounted in cool compartment. Thermally protected motor. Totally enclosed and factory lubricated fan motor
• Protection Devices: High-limit temperature control with automatic reset. Heat purge device clears residual heat
• Heating Element: Stainless steel sheathed tubular heating element. Concentric formation for optimum heat transfer
• Control: Factory installed fused control circuit. Factory installed contactor. Temperature control by means of factory fitted thermostat or remote mounted thermostats.
• This heater produces a totally dry heat, no condensation, no gas, no fumes. It reaches maximum heat output within a few minutes of being turned on. It is quick and easy to install reducing installation costs. Air temperature can be controlled by the heater’s built-in thermostat (if ordered with heater) or alternatively by a remote thermostat
• Installation: Specially designed bracket for ceiling or wall-mounting provides a variety of discharge angles and 360° rotation. Suspension hooks are supplied as standard
• Maximum recommended mounting height: 2.5m (horizontal discharge), 3m (vertical discharge)
• Safety distance from heater: 2.0m
• Maximum operating ambient temperature: 30°C
• Guarantee: 1 year
• Dimensions: 320mm height, 435mm width, 405mm depth. 
• Weight: 18kg
• All Heaters MUST BE EARTHED.