10W Over Mirror Warm White LED Light 3000K 750lm with Pull Cord Switch IP44 Rated

This is an over-mirror bathroom LED light with pull cord switch integrated, an energy efficient bathroom wall light (ideal for above-mirror mounting). It has a life expectancy of 30K hours and offers a warm white 3000K 740lm light. It is primarily designed for bathrooms - a great bathroom mirror light - but it is equally useful for many other applications around the house.

10W Over Mirror Bathroom LED Light (Warm White) - Features

• Lumens 120°: flux 750 lm, Lumens total flux 835 lm
• Switching: Pull cord on/off switch integral.
• Wattage: 10W LED lamp, integral.
• Colour temperature: 3000K warm white
• Luminous flux: 750lm
• Dimming: No, non-dimmable fitting
• Nominal life time of the lamp: 30,000 hrs
• Lamp dimensions: 435mm width, 36mm height, 55mm depth
• Nominal beam angle: 120°
• Lamp power factor: >0.5
• Lumen maintenance factor at end of nominal life: >70%
• Starting time: <0.1s
• Colour rendering: =80
• Number of switching cycles before premature lamp failure: 15,000
• Warm-up time: up to 60 % of the full light output Instant full light
• Colour consistency: Within 6 step Macadam ellipse
• Rated peak intensity: 250cd
• Earth: this fitting must be connected to earth termination.
• High frequency electronic ballast
• CE Marked fitting. 
• F Marking: F Marked, this product is suitable for installation on surfaces with normal flammability e.g. wood, plasterboard and masonry. It is not suitable for use on highly flammable surfaces (e.g. polystyrene, textiles). 
• IP rating: IP44 rated fitting, indoor use only, suitable for use in living areas, and bathroom zones 2 and outside (safe) zone only. If being fitted in a bathroom a 30mA RCD must be used.

Note: This LED bathroom light is not suitable for accent lighting