1ft/308mm 60W Thermotube Tubular Heater in White, 110V/230V Tube Heater for Wall or Floor Mounting

The TH1H Thermotube tubular heater is a 1ft / 308mm long tube-shaped 60W heater in white designed for mounting on the wall. 

It was designed with safety in mind and built in the United Kingdom; it is a versatile product used as a heat source for frost protection and preventing condensation. It can be used in different environments such as providing greenhouse heating, heating an airing cupboard where there's no longer a hot water cylinder, stopping condensation building on windows and walls, and providing low cost heating on building sites.

This model is pre-wired with a cable and 3-pin plug, also coming with the link facility and fixing brackets, making installation a walk in the park. Safety features include a thermal cut-out if the tube is overheating.

Thermotubes must not be mounted less than 50mm from the ceiling and not less than 30mm from the floor or skirting. A minimum of 50mm should be allowed beneath any shelf or projection. To ensure safe operation, Thermotubes MUST always be mounted horizontally on the wall or floor

1ft 60W White Tubular Heater - Specs

• Thermotube tubular IP54 heaters are rustproof and when sealed are more resistant to damp.
• Thermotubes are particularly easy to install either singly or in banks, although it is essential to observe a few precautions when installing for use under severe conditions.
• Loading: 60W
• Voltage: 110V or 230V; the 110V Thermotube must only be used with a 110V isolating transformer
• Weight: 0.30kg
• Length: 308mm / 1ft
• Tube diameter: 60mm
• Width: 75mm from the base of mounting bracket
• Depth: 95mm from wall when mounted in bracket
• It must be fitted to a switched outlet having a contact separation of 3mm in both poles.
• It is supplied with two 1-way wall mounting brackets and cable gland.
• Construction: the element is wound nickel / chrome resistance wire on mica frame; the case is port hole drawn 50mm diameter aluminium tube, the cover and the brackets are 20% glass filled polypropylene.
• Wiring: 20mm diameter provision for conduit and 3 core flexible mains lead. 
• IP rating: IP54 rated, having a limited protection for ingress of dust; it is protected against water splashed onto the heater's surface. However, they are NOT waterproof. 

Note: This heater is not equipped with a device to control the room temperature.