2 Gang 2 Way 10A Double Rocker Switch in Satin Brass Screwless Flat Plate Studio Range

This is the Heritage Brass Y44.210.SB, a 2 Gang 2 Way 10A Double Rocker Switch in Satin Brass Screwless Flat Plate Studio Range. It is part of the Heritage Brass Studio range - the screwless satin brass range. It has a slim and elegant styling, with concealed fixings (no visible screws on the plate). 

• Concealed fixings, grid system construction, and plate with soft round edges. 
• It is a double rocker switch (2 way) on a single size plate, with no trim. 
• Rating: rated at 10A
• Finish: satin brass plate, no visible screws (screwless); high quality finish.
• Solid metal rockers complement the 2-3mm projection low profile plate. Trim-less design (no plastic trim around the rocker / toggle switch). 
• It is an attractive, easy, and flexible option to install for both new and retrofit projects.
• Plate size: 88mm x 88mm 
• Back box: 25mm (a single back box needs to be purchased separately)

2 Gang 2 Way Switch - Y44.210.SB - Technical Specs

• Studio Range (Screwless) - Satin Brass
• It is part of the Heritage Brass Studio Range (Screwless - no visible screws on the plate)
• Insert Type: 2 Gang 2 Way Rocker Switch
• Finish of the plate: Satin Brass
• Finish of the switch: Satin Brass
• Body and Switch Trim: Trimless, no trim around the switch
• Height: 88mm
• Width: 88mm
• Fixing Hole: Centres Box Fixing = 60.3 mm
• Minimum Box Depth: 25mm
• Current: 10 Amp Voltage: 230V, mains voltage
• Terminal Capacity: 4 mm2
• Earth Terminal Capacity: 5 mm2
• Class 1 Electrical rated: Face plate must be earthed
• Ambient Operating Temperature: -5°C - 40°C
• Recommended Location: For indoor use only
• Standard: BS EN 60669-1

Note: the Heritage Brass Studio plate style is NOT suitable for dual box application.