2 Gang 2 Way Trailing Edge LED Dimmer 10-120W Polished Brass Plate and Knob, Elite Flat Plate

This is the Heritage Brass T01.972.TED, a 2 Gang 2 Way 10W-120W max. per module Push On/Off LED Dimmer (Trailing Edge) in Polished Brass Elite Flat Plate - shiny brass plate and knob. It is part of the M-Marcus (Heritage Brass) Elite Flat Plate range which combines style with elegance in one of the most extensive ranges of high quality flat plate electrical wiring accessories available on the market.

It uses a Varilight V-Pro LED dimmer module, trailing edge, and can dim good quality dimmable LED lights up to 120W max. 

Single LED dimmer with push ON/push OFF action - rotary dimmer, ideal for dimming LED lights up to 120W, on a flat plate. 

Heritage Brass T01.972.TED - 2 Gang Trailing Edge LED Dimmer

• It takes max. 10 LED lamps per module / gang. 
• Wattage: min. 10W, max. 120W per module / gang. 
• Suitable for most quality dimmable LED lamps (compatibility is not guaranteed with all LED lamps). 
• Finish: polished brass flat plate and rotary dimmer knob.
• Elite Flat Plate complies fully with the relevant British Standards. 
• The plate size is 86mm x 86mm (single size plate). 
• You will also require a back box (see the back box depth of this device) which needs to be ordered separately. 
• Elite Flat Plate Range - Polished Brass
• 2 Gang Trailing Edge - T01.972.TED
• Range: part of the Heritage Brass Elite Flat Plate Range from M-Marcus
• Product type: 2 Gang Trailing Edge
• Plate finish: Polished Brass
• Switch Colour: Polished Brass
• Body and Switch Trim: Trimless
• Height: 86 mm
• Width: 86 mm
• Fixing Hole Centres: Box Fixing = 60.3 mm
• Minimum Box Depth (mm): 35
• Voltage: 230V, mains voltage
• Power Max 120 W - 10 Lamps Trailing Edge
• Terminal Capacity: 4 mm2
• Earth Terminal Capacity: 5 mm2
• Class 1 Electrical Rating: Face plate must be earthed
• Ambient Operating Temperature: -5°C - 40°C
• Recommended Location: Indoor use only
• Standard: BS EN 55014, BS EN 60669-2-1