2-Way V-Dim Dimmer for HF Ballasts/LED Drivers requiring 1-10V DC Input (1 Grid Space) Varilight GFP1M1W

This is the Varilight GFP1M1W 2-Way V-Dim Dimmer for HF Ballasts/LED Drivers requiring 1-10V DC Input (1 Grid Space) available at Sparks Electrical Wholesalers for the best price. 

Note: this grid module has a long spindle. It comes with a Varilight Grid module plate. It can be used with other manufacturers of grid when purchased with the correct adaptors - see GAWBG (BG Nexus Grid), GAWGU (Schneider Ultimate), and GAWMK (MK Logic) - to be ordered separately.

This dimmer switch is designed to work with one or multiple dimmable ballasts up to 20mA.

The mains switch is rated at 230V a.c. 6A maximum. Do not use this dimmer switch for any other purpose.

The dimmer switch will be damaged if used for these applications.

Do not connect the 1–10V control terminals to the mains. Incorrect use will make your guarantee invalid

2-Way V-Dim Dimmer for HF Ballasts/LED Drivers requiring 1-10V DC Input - Features

• Modules suitable for any PowerGrid faceplate
• V-Dim dimming technology
• Designed to work with one or multiple dimmable ballasts up to 20mA
• Create your own switch combinations

2-Way V-Dim Dimmer for HF Ballasts/LED Drivers requiring 1-10V DC Input - Specs

• Range: PowerGrid Module
• Finish: White
• Product Category: 1-10V Dimmers
• Insert/Knob Colour: White Knob
• Dimensions: 24x23x53mm
• Net Weight: 38g
• Gross Weight: 40g
• Recommended Back Box Depth: 35mm
• Operating Voltage: 230v 50Hz (Switching), 1-10V DC (Dimming Control Signal)
• Maximum Load Rating: 6A (Switching) 20mA (Dimming Control Signal)
• Maximum Current Rating: 6A (Switching) 20mA (Dimming Control Signal)
• Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
• Intended Applications: Indoor Use Only. Domestic lighting circuits.
• Safety Advice: For use with 1-1V ballasts/drivers only. Check the in-rush current for LED bulbs or drivers does not exceed 6A, and the rating on the control signal side of the ballast/driver does not exceed 2mA before connecting. Fit inrush current limiters where necessary. Do not overload. 
• Applicable Safety Standard: BS EN 60669-2-1

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• GFP1M1W instructions.pdf (395.79 kB)
• GFP1M1W datasheet.pdf (410.91 kB)