2-Wire (No Neutral) Push Button Time Lag Switch 10A with Adjustable Timer and LED Ring Light, CP Electronics GITLC

Model No. GITLC by: CP Electronics
Availability: Usually 3-5 days


Free Delivery
(over £100+VAT, applies to zones A&B only, £6+VAT otherwise)
Click & Collect
Order online & collect in store
This is the CP Electronics GITLC - a 2-Wire (No Neutral) Push Button Time Lag Switch 10A with Adjustable Timer and LED Ring Light at Sparks. It is a stylish no neutral time delay switch ideal for use as switch for lighting, heating, or ventilation (max. 10A); it provides accurate timed control. It has an adjustable timer of either 5 sec - 15min or 15min - 2h, and it comes with a stylish green LED ring. It works with any type of lamp and switches any type of load. 

This is a digital time delay switch in the Green-I range, fully compatible with all existing light fittings. The incredibly user-friendly controls allow the delay to be adjusted between 1 and 30 minutes.

The 2-way circuit allows for the use of an extra movement sensor switch for two-way activation of the lighting, heating or ventilation system. Green-I switches are no-neutral, so all of the units can be fitted in place of an existing appliance switch.

2-wire No Neutral 1 Gang Time Delay Switch - Features

  • Single gang time lag switch, can work as a 1-way or 2-way switch. 
  • Replaces a standard light switch or dimmer
  • Suitable for lighting, heating or ventilation loads
  • Turns on for adjustable time period
  • Illuminated locating ring
  • Switches all lighting, heating and ventilation loads up to 10A
  • The internal battery should last more than 5 years. When it needs replacing, a red LED will flash on the front of the unit. 
  • Low profile, no-neutral time lag switch to control a range ofl oads up to 10A.
  • It has a LED ring light to aid location in low light conditions

CP Electronics GITLC 2 Wire Push Button Time Lag Switch - Technical

  • Single gang time lag switch, white moulded finish.
  • Interchangeable fascia: the cover plate can be purchased separately and thus change the finish of the device, see GIFP-ST / GIFP-BZ
  • Voltage 230VAC +/- 10%
  • Frequency 50Hz
  • Temperature 0ºC to 35ºC
  • Time delay: 1m-30m 15m-2h
  • Power: 10A. 
  • Load rating at 230V AC: 10A for incandescent, fluorescent lighting, compact fluorescent lighting, LED lighting, low voltage halogen, tungsten halogen, 2D fluorescent.
  • Suitable for use with LED lights
  • Compliance BS EN60669-2-1 & BS EN55015
  • CE Mark
  • No Neutral. Adjustable Timer. 
  • Stylish Green LED Ring, illuminated (can be disabled).
  • Switches any type of load. 
  • Works with any type of lamp
  • UK design
  • Warranty: 5 years manufacturer warranty
Note: When using with LED lighting, the LED light ring must be disabled. Please consult the installation guide for more information.
Switches & Sockets Specific
Amp 10
Brand CP Electronics
Finish White
Gang 1
Insert White
Plate Plastic
Style Moulded White
Type Time Delay Switch

Need more detailed specs?

Ask a question

Note: HTML is not translated!


Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.


We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.