20A High Output Run Back Timer with Adjustable Time Delay Settings CP Electronics RBT1

The CP Electronics RBT1 is a high output electronic run back timer, particularly suitable for the control of immersion heaters.

The appliances connected to it can be powered for a set time (15 minutes to 2 hours in 15 minute increments) and adjusted further by the user.

The simple display shows the user how much time is left to run, and the ON/OFF switch allows him to cancel the timing program. The memory function remembers the last timing sequence selected.

RBT1 High Output Run Back Timer - Features

• You can adjust the time delay settings via a push button. 
• Suitable for lighting, heating, or ventilation control. 
• It comes with a 5 year manufacturer warranty. 
• It is ideal for immersion heater control. 
• Adjustable timer: high output runback timer
• Time delay: 15m to 2h, adjustable in 15min increments

CP Electronics RBT1 Run-back Timer - Technical

• Load: 20 Amp resistive load (including immersion heaters), 6A fluorescent lighting, 3A compact fluorescent lighting, 3A low energy lighting, 3A low voltage lighting (switch primary of transformer), 3A Fluorescent lighting (max 6 fittings recommended)
• Supply voltage: 220-240 Volts AC 50 Hz
• Time out period: 15 minutes to 2 hours in 15 minute increments. 
• Fixing method: For surface fixing - 25mm deep plastic surface mount moulded box. For flush fixing - 25mm steel wall box or 32mm deep cavity wall box.
• When installing, avoid direct sunlight entering the sensor, don't site within 1m of forced air heating or ventilation, don't site within 1m of any lighting, and do not fix on a vibrating surface. 
• Terminal capacity: 4.0mm2
• Material: flame retardant ABS
• Class 2 electrical rated.
• Temperature: -10degC to 35deg C
• Conformity: EMC-89/336/EEC, LVD-73/23/EEC. CE Mark. 
• Dimensions: 86mm x 86mm plate, 19mm projection (+2mm buttons projection), 12mm depth in the wall.

Note: This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.