230V input 11.5V Output 10-250VA Dimmable Electronic Transformer for Low Voltage Lighting 10-250W Loads, Mode ET-250-PL-230-RD

Model No. ET255T by: Mode Lighting.
£54.95 Ex. VAT
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Usually 3-5 days

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This is the Mode Lighting ET-250-PL-230-RD - a 50-250 VA Dimmable Electronic Transformer for Low Voltage Lighting for 10-250W Loads. It is a 230/240V input and 11.5V output transformer. 

Note: the image is for informative purposes only (to see the size and aspect of the transformer); this is a 12V transformer. 

Mode 10-250VA Dimmable Electronic Transformer - Specs

  • Dimmable with ALL types of domestic and hard-wired dimmer.
  • Self resetting, short circuit and overload protection.
  • Complies with EC EMC and Low Voltage Directives.
  • Complies with EMC Emission Standard EN 55015.
  • Complies with EMC Immunity Standard EN 61547.
  • Energy efficient, ensures cool operating temperature.
  • Terminal covers and cable clamps.
  • Suitable for 10W to 250W loads.
  • Flame retardant moulded enclosure, UL94-V0.
  • Lightweight and compact size, only 305 grams.
  • Mode products are guaranteed for two years.
  • Low audible noise throughout the dimming range.

Mode Lighting 10-250VA Dimmable Electronic Transformer - Specs

  • Product code: Mode Lighting ET-250-PL-230-RD
  • Voltage: 230/240V input, 11.5V RMS nominal output
  • Input current: 0.75A max
  • Output current: 22A max
  • Input power: 0.99
  • Dimensions: 173mm length, 39mm height, 54mm width
  • Output power: 10-250VA
  • Input frequency: 50/60Hz
  • Output frequency: 40 KHz
  • Input terminals: 2xL 2xN
  • Output terminals: 3 x 0V, 3 x 12V
  • Temperature case rise 45 degs max, ambient 40 degs, case 85 degs max
  • Protection: short circuit (auto-reset), overload (auto-reset), thermal (auto-regulating)
  • Fusing: fusible PCB link, no secondary fuse required
  • Standards: EN 61347-2-2 (safety), EN 55015 (EMC emission), EN 61047 (performance), EN 61000-3-2 & EN 61000-3-3 (harmonics fluctuations), EN 61547 (EMC immunity)
  • Regulation: better than 5%
  • Weight: 305g
  • Efficiency: typical 96%

Dimmable Transformer - general details

  • Electronic Transformers operate at high frequencies.
  • The output voltage cannot be measured on a standard voltmeter.
  • The output leads should not be separated by more than 10mm and should be kept to a minimum length to achieve optimum regulation and EMC suppression.
  • Electronic Transformers are not recommended for parallel rod or tensioned wire lighting systems.
  • Observe dimmer manufacturer's recommended load ratings.
  • Electronic Transformers should be located in well ventilated areas and should not be covered or enclosed by insulating materials.

 

Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2019 SparksDirect

Award Winning Ecommerce from Cyber-Duck