This is the Integral LED ILBHA040 Tough-Shell+ Bulkhead (White) IP66 24W 4000K 2400lm IK10 with a back-lit LED design that provides a 120 degrees beam angle with an even light distribution. This particular model has an integrated emergency function which switches automatically between power failure and power restoration lasting for 3 hours in emergency mode at 3W max. It also has an integrated emergency and microwave sensor function with an adjustable detection area up to 6M, delay time and daylight sensor options.
The white Tough Shell and White LED Bulkhead, manufactured by Integral LED (model ILBHA040), is a 24W bulkhead exterior light with an integrated 3 hour emergency function and adjustable microwave sensor. It has a back-lit LED design shining a 120 degree beam angle of 4000K cool white light for your home’s exterior space. This model spreads its vibrant light evenly and it is ideal for usage on external walls in homes, with side and rear cable entries for extra convenience.
The luminaire is applicable for both indoor and outdoor installation and is engineered from a toughened IK10 rated polycarbonate body, complete with a polycarbonate optic diffuser. The high IP rating and strong construction of this model makes it suitable for all types of environments, both domestic and commercial. It will fit conveniently onto ceilings, stairways and even bathrooms. With an impressive running life of 35,000 hours (based on normal usage), this bulkhead will be delivering a strong 2400 lumens of light.
It also features a combined microwave sensor with an adjustable detection area up to 6 metres with a delay time and daylight sensor options.The motion detector emits microwave signals and measures the time taken for the signal to be reflected back to the sensor, which establishes a baseline of 6 metres to work from. If a person moves into this detection zone, they will cause a disruption to the microwave beam, altering the echo time and triggering the lights. The emergency function keeps the bulkhead running in case of a power failure for 3 hours in emergency mode, operating at a maximum 3W.
This LED bulkhead with a tough shell construction is suitable both for interior and exterior lighting; it is engineered from a super-tough IP10 rated polycarbonate body, and it is ideal for outdoor lighting at home, industrial estates, and car parks. You can also install this fitting inside the house on the wall or the ceiling in hallways, stairways, and even in the bathroom (it is suitable for zones 1, 2, and 3). It has a long life expectancy of 35.000h based on a normal usage, and it comes complete with the installation guide.
This luminaire is rated IP66 – suitable for outdoor and indoor areas including external amenity lighting, car parks, bathrooms (Zone 1, 2, 3 area), hallways, stairways, corridors, and etc. Not suitable for water immersion. Do NOT cover the light source. To avoid damage; do NOT lift, carry or let the luminaire hang by any part of wiring.
|Electrical Rating||Class 1 - Earthed fitting|
|Energy Type||Mains Voltage 240V|
|Fire Rating||F Marked|
|Lamp Type||LED Light|
|Number of Lamps||1|
|Rooms||Bathroom, Indoor, Outdoor|
|Tasks||Wall / Ceiling|
|Zone Rating||1, 2, and 3|
Let us know and we might match the price for you
Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2021 SparksDirect