3 Gang LED Dimmer Verdigris Plate and Knobs: 3 Gang 200W Halogen / 3 x 0-120W Trailing Edge Rotary LED Dimmer

This is a Forbes and Lomax 3GTE250/VBR - a 3 Gang 200W Halogen / 3 x 0-120W Trailing Edge Rotary LED Dimmer and Push On/Off on a Verdigris Plate with matching Knob.

Each dimmer is suitable for up to 120W of dimmable LED lighting (max 10 lamps) or up to 200W of good quality mains voltage incandescent and halogen bulbs - per gang, as well as good quality electronic low voltage transformers. 

3 Gang LED Dimmer Verdigris Plate and Knobs

• Part of the Forbes & Lomax Trailing Edge Rotary Dimmers, LED Dimmers, and Push On/Off switches. 
• This is an LED compatible dimmer, which means that it can work with up to 10 LED lamps, taking loads of 0W - 120W in total per gang. 
• Can dim LED lights (if the LEDs are good quality dimmable LED lights) and can switch any kind of loads. 
• Three rotary dimmers on a twin plate, wider plate for horizontal mounting on the wall. 
• Finish: Verdigris Plate with matching Knob
• The Verdigris range has a rich aged bronze patina. Inspired by a visit to the museum at Mycenae, these bronze switches and sockets look stylish in both contemporary and traditional interiors.
• The plates are hand finished to produce a slightly variable effect, making each plate unique which adds to the distinctive look.
• This is suitable for incandescent/low voltage loads, compact low energy dimmable fluorescent loads, and some mains LED applications.
• The Forbes and Lomax trailing edge dimmers are soft start, giving a gradual increase or decrease in the intensity of the light when they are switched ON or OFF and therefore extending the lamp life. 
• Superior trailing edge technology reduces noise and flicker. It uses a Varilight V-Pro intelligent dimmer switch, programmable (see the instructions).
• Suitable for good quality mains voltage incandescent and halogen bulbs, as well as good quality electronic low voltage transformers and dimmable low energy lighting (CFL or LED). 
• Intelligent, self-resetting protection is included to protect the dimmer from overload. 
• Ideal for dimming most mains voltage dimmable LED light bulbs and LED lights. 
• Not suitable for use with wirewound transformers. 
• Matching push on/off switches allow us to provide switches that look like a dimmer and offer the ability to mix dimmers and switches on the same plate while keeping a uniform look. 
• This dimmer is suitable for 0W - 120W of dimmable LED lighting (max 10 lamps) or up to 200W of good quality mains voltage incandescent and halogen bulbs - per gang, as well as good quality electronic low voltage transformers.