• 3 Gang Momentary Switch Aged Brass Plate and Button, 3 Button Dimmer Controller by Forbes and Lomax

3 Gang Momentary Switch Aged Brass Plate and Button, 3 Button Dimmer Controller by Forbes and Lomax

Model No. 3GBELL/OLB by: Forbes and Lomax
Availability: Normally In Stock

£153.24

Ex. VAT

This item requires:

Free delivery

(over £100+VAT, applies to zones A and B only, £6+VAT otherwise)

This is the Forbes and Lomax 3GBELL/OLB, a three gang momentary switch aged brass plate, Forbes and Lomax Three-button dimmer controller.

The Forbes and Lomax Aged Brass finish has been designed to look beautifully antiqued upon installation and has been left unlacquered to patina even more over time. Alternatively, it can be polished to bring back some of the shine.

The real beauty of this finish from Forbes & Lomax lies in the mellow aged look of the brass, as though it has been an original part of the interior for many years. The toggles, dimmer knobs and push buttons are supplied polished but unlacquered, providing a subtle accent to the more muted finish of the plates.

All momentary switches (contact-closure switches) require an in-line dimming pack to enable them to work as a dimmer, or a relay pack to have an ON/OFF function. The button dimmer controller allows dimming from more than one location, and it can be used to control home automation systems.

Dimensions: 22.2mm diameter button dimmer, with no plastic trim.

The Button Dimmer Controller from Forbes & Lomax is a push-to-make momentary action switch that controls an In-Line Dimmer Pack. The system allows dimming of a lighting circuit from more than one position.

Please note: The button dimmer / momentary switch will only work in conjunction with an inline dimmer (see the required items). The way it works is: one in-line dimmer (impulse dimmer) per button dimmer. For 50-1000W 4A dimming you can order the ID0401 and for LED dimming you can use ID0101LE.

The Forbes and Lomax Button dimmers

  • Standards, Approvals & Directives: Button dimmer Conforms to BS EN 60669 - 1: 1999 when assembled to appropriate plate and grid and installed correctly. ASTA Certificate No: 16240
  • Button dimmers are manufactured from brass and finished to complement or match the cover plates.
  • They feature a solid brass button
  • All products clearly printed with BSNo’s, ratings, etc
  • They are contact-closure momentary switch
  • Button dimmers are screwed to appropriate grids.
  • All the Forbes and Lomax buttons are available in the complete range of plate finishes: Unlacquered Brass, Antique Bronze, Stainless Steel, Polished Nickel, Verdigris and Invisible.
  • Supply voltage: 250V AC, 50Hz
  • Current rating: 4A
  • Ambient operating temperature: -5 degrees to 40 degrees Celsius
  • Max. installation altitude: 2000m
  • IP Rating: IP2XD
  • No of operations: 40.000
  • Terminal capacity: 3 x 1mm (Flex), 2 x 1mm (Solid), 2 x 1.5mm (Solid), 1 x 2mm (solid), and 1 x 2.5mm (Solid).
  • Button dimmer dimensions: 23mm width x 50.3mm height x 30.5mm depth.

About the Forbes and Lomax Aged Brass Finish

  • It can be left unlacquered to patina over time.
  • It can be polished to make it a little shiny.
  • It has a mellow aged looking brass, as if it was part of the interior for many years.
  • Toggles, dimmer knobs, and push buttons are polished but unlacquered.
Switches & Sockets Specific
Amp 4A
Back Box Depth 35mm
Brand Forbes and Lomax
Finish Aged Brass
Gang 3
Insert No Insert
Plate Metal
Plate Dimensions 146mm x 86mm
Style Flat Plate
Type Momentary Switch

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.