7-day Programmable Thermostat in White for Loads up to 3.4kW with Summer Switch, BN Thermic U16C

The BN Thermic U16C offers simple 7-day programming buttons for programming hidden directly behind the hinged doors on the narrow thermostat face. This gives the gleaming white thermostat a clean and smart appearance.

This thermostat is capable of switching loads up to 3.4kW. The BN Thermic U16C is compatible for ‘air and floor sensors’ or ‘floor sensor only’ meaning it can be used to operate a radiant floor and measure the air temperature.

Among the features there is a backlit LCD screen and a summer switch allowing the heating to be switched off without losing the programme. You can check from the thermostat to analyse whether the combined load rating of several mats are not exceeded if they are being placed together.

BN Thermic U16C Thermostat - Features

• Modern Digital Display, backlit LCD screen
• Supplied with floor probe
• It is capable of switching loads up to 3.4kW, ideal for underfloor heating mats.
• 'Air & Floor sensor' or 'Floor only sensor' settings, configurable
• Simple 7 Day programming (the buttons are behind the hinged doors on the thermostat face)
• Summer switch programme saving allowing heating to be switched OFF without losing the programme.

U16C Programmable Thermostat - Technical

• Temperature sensing: Electronic
• Mounting: Wall - semi-recessed in standard single-gang box
• Adjustable range: +5°C to +30°C
• Switching capacity: 15A 230V (larger loads and 3 phase loads can be switched via a suitably rated contactor)
• Contacts: Single-pole single-throw
• Programme periods: 7 day / 4 per day
• Voltage supply: 230V
• Max. Load: 16A or 3450 Watts (NI)
• Rated Impulse: 2500 V
• Temperature display range: 0degC to 70deg C
• Temperature display resolution: 0.5deg C
• Operating temperature: 0deg C to 50degC
• Storage temperature: -20deg C to 50deg C
• IP rating: IP20 rated
• Electrical rating: Class 2 
• Dimensions: height 82mm x width 78mm x depth 17mm
• Model: BN Thermic U16C Programmable Thermostat

Note: In case of a power outage, all programs and temperature settings are saved. The clock must be re-programmed if the power outage lasts for more than 4h. When power returns, the thermostat returns to the mode of operation preceding the outage.