Batten Mounted PIR Occupancy Switch with Intelligent Photocell (5m version)

Model No. BPIR5M by: Danlers
Availability: Usually 2 - 3 Days

£34.84

Ex. VAT
List price £40.99
You save £6.15!

Free delivery

(over £100+VAT, applies to zones A and B only, £6+VAT otherwise)
This is the Danlers batten mounted PIR occupancy switch with Intelligent photocell - batten mounted PIR switch - the 5m version. The Danlers Batten mount passive infra-red occupancy switches (PIR) with ‘Intelligent’ Photocell can be mounted onto the end of lighting battens via the 20mm knock out. The switch includes the connection 20mm thread and 1m of wire tails to connect to the lighting ballast.
 
The BMINTPIR5M incorporates a passive infra-red quad sensor to detect movement of a warm body within the detection zone. On detecting movement, if the ambient light is dark enough, the PIR will switch the load on. The ambient threshold can be set by the user to between approximately 100 and 3000 lux (on the working plane) via the LUX adjuster.
 
BMINTPIR5M operates with “ACTIVE” Lux control. It constantly samples the ambient LUX level and will, even if the area is occupied, switch off the controlled lamps (if the lux rises above the user set threshold and remains there for the overlux timeout period). If the artificial lights are ON and the LUX then rises greater than the set threshold (plus the “stored calibrated hysteresis” – saved during calibration) the product will then switch the artificial lights off after a preset time delay.
  • The calibration process removes the site specific addition of artificial light from any decision to switch the lights on/off.”
  • This technology has a GB patent pending No: 1219746.3.
  • BMINTPIR5M has user feedback including a "real time" photocell status indicator: Green LED illuminated indicates sufficient ambient light - load turns off after threshold delay.
  • If no more movement is detected within a certain time, then the PIR will switch off the load. The time can be set via the internal TIME adjuster to between 10seconds and 40 minutes.

NOTE: It is advised that this product is only used in environments where some natural light is available.

  • Weatherproof: IP53 rating
  • Detection range: Up to 5m
  • Detection angle: 100°
  • Time lag: 10 seconds to 40 minutes (adjustable)
  • Photocell range: 100 lux to 3000 lux (adjustable)
  • Loading:  
    # Up to 10 amps (2500W) resistive loads and tungsten.
    # Up to 6 amps (1500W) fluorescent (switch start).
    # Up to 3 amps (750W) electronic or wire wound transformers, compact fluorescent or LED lamps.
  • Dimensions: 120 x 50 x 36mm plus 1 metre wire tails

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.