ControlZAPP Ceiling Flush Mounted Control for Switching & Dimming DALI Ballasts, Programmable CZCEFLPDALI

This is the Danlers ControlZAPP CZCEFLPDALI programmable energy saving control for switching and dimming DALI ballasts. This multi-functional controls is ideal for flush mounting through suspended or plasterboard ceilings. Programmable by Android phone (4.3 or later) or tablet via Bluetooth Smart. Easy to configure interface enabling greater energy saving, safety and security. CZCEFLPDALI is designed for use with DALI ballasts (broadcast). To control DALI ballasts you will require a DALI Power Supply Unit such as DALIPSU.

Danlers CZCEFLPDALI - Features and Benefits

• Passive Infra-red occupancy switching
• Patented ‘Intelligent’ photocell calibration
• Current light level indicator on APP to assist setting switching threshold
• Lighting load can be dimmed by APP to assist setting accurate maintained lux level (daylight linked dimming)
• ControlZAPP Programmable Energy Saving Control for Switching and Dimming DALI Ballasts
• Accurately timed override ON or OFF
• Accurate ‘Real time’ clock with battery back up when powered off
• Automatic Daylight Savings Time (BST) correction with offset adjustment
• Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP
• Upload indicator to ensure successful programming
• LED indicator for presence recognition within its detection range (can be turned off)
• Override possible via phone or tablet, up to 100m range
• Groups of ControlZAPP devices can be controlled together
• Password protection - safeguarding against accidental or malicious interference

Ideal for: offices and commercial premises, factories and warehouses, retail and display, hotels and leisure, shared accommodation, education and healthcare, plus many other applications.

Technical Specifications

• Product code: Danlers CZCEFLPDALI
• Voltage: Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode).
• Loading: Suitable for switching and dimming DALI ballasts (broadcast only) and can control up to 40mA, eg. 20 ballasts at 2mA (varies according to make and model of ballasts). 
• IMPORTANT: To control DALI ballasts you will require a DALI Power Supply Unit. DANLERS DALI Power Supply Unit (order code DALIPSU) is rated at 40mA (DALI standard allows 250mA maximum). The controls interface of a DALI ballast normally sources at 2mA. Please refer to your ballast instructions.
• Detection range: 360° with 7m diameter when mounted at a 2.4m ceiling height
• Time Lag: Easily adjusted by APP to individual requirements from 10 seconds to 24 hours
• Short Visit Time: Easily adjusted by APP to individual requirements from 10 seconds to 24 hours.
• Lux: Enabled, 30 to 1000 lux. Disabled: Photocell inactive.
• Sensitivity: Adjustable via APP.
• Device Dimensions: 85mm diameter x 79mm. Requires 73/75mm diameter hole in false or plasterboard ceiling. Ceiling void at least 78mm deep.
• Power Supply dimensions: 120 x 50 x 32mm.
• Telejack Connector: 180mm in length.
• Also supplied with Telejack Connector (not in the picture) to connect ControlZAPP device with its power supply.

Additional Features

• Accurate ‘Real time’ clock with battery back up when powered off
• Accurately timed override ON or OFF
• Active or Passive PIR occupancy switching
• Patented ‘Intelligent’ photocell calibration
• Automatic Daylight Savings Time (BST) correction with offset adjustment
• Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP.
• Upload indicator to ensure successful programming.
• LED indicator for presence recognition within its detection range (can be turned off).
• Manual Group Control ON / OFF / RESUME feature on APP

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• danlers-ControlZAPP.pdf (1.72 MB)