1 Gang 2 Way 400W Dimmer on Transparent Screwless Flat Plate and Metal Knob (Leading Edge) - Specify Finish when Ordering

Model No. PC1X40 by: Hamilton Litestat
Availability: Usually 5-7 days

£35.18

Ex. VAT
List price £76.48
You save £41.30!
Free Delivery
(over £100+VAT, applies to zones A&B only, £6+VAT otherwise)
Click & Collect
Order online & collect in store

This is the Hamilton Litestat 1 Gang 400W 2 Way Single Dimmer (part of the Perception CFX range) in a Transparent Plate with Satin Chrome Rocker. Clear perspex plate with metal knob. Concealed Fixing Leading Edge Push On/Off Resistive Dimmers on Transparent Plates

Note: this item is a made to order product with an extended lead time, and is therefore non-returnable. For more details, see the Terms and Conditions - non-returnable items.

When ordering this device, please specify in the comments the finish of the dimmer knob - it comes standard in Satin Chrome, and it is also available in Bright Chrome (PC 1X40 BC), Polished Brass (PC 1X40 PB), Satin Brass (PC 1X40 SB), Antique Brass (PC 1X40 AB), and Black Nickel (PC 1X40 BK).

Perception Clear Push On/Off Dimmer 1 gang 2 way 40W (min) - 400W (max)

  • Rocker Switch: standard in Satin Chrome (PC 1X40 SC), also available in: Bright Chrome (PC 1X40 BC), Polished Brass (PC 1X40 PB), Satin Brass (PC 1X40 SB), Antique Brass (PC 1X40 AB), and Black Nickel (PC 1X40 BK).
  • Device type: Dimmer (resistive - see note below)
  • Plate material: Plastic
  • Size (single): height 86mm, width 86mm, depth 4.2mm
  • Box fixing hole centres: 60.3mm
  • Minimum wall box depth: 35mm
  • Wattage: 400W
  • Current rating: 1.66 Amp
  • Voltage: 220/250V AC
  • Max load: 400W resistive
  • Mains Frequency: 50Hz
  • IP rating: IP2XD
  • Switched Poles: Single
  • Terminal Capacity 1: 2 x 1mm2
  • Terminal Capacity 2: 2 x 1.5mm2
  • Earth Terminal Capacity 1: 5 x 1mm2
  • Earth Terminal Capacity 2: 4 x 1.5mm2
  • Earth Terminal Capacity 3: 3 x 2.5mm2
  • Earth Terminal Capacity 4: 1 x 4mm2 Multi-Strand
  • Earth Terminal Capacity 5: 1 x 6mm2
  • Product Class 1: Face plate must be earthed
  • Ambient Operating Temperature: -5° to +40°C
  • Recommended Location: indoor use only
  • Max installation Altitude: 2000m
  • BS EN ISO Standard: BS EN 60669-2-1
    * Denotes LEADING EDGE TECHNOLOGY DIMMERS. Resistive dimmers are suitable for control of incandescent lamps. When dimming GU10 type mains halogen or linear halogen lamps the dimmers need to be derated by 25%. When used for dimming low voltage electronic h
  • Patents and Trademarks: CFX is a Registered Trade Mark No 239866.

Note: Tungsten filament GU10 lamps must be branded and with a fused base. When using mains voltage halogen lamps - dimmers should be de-rated by 25%. 

Please note: this item comes with an invisible / clear perspex plate and a metal plate (a stencil); you can install the metal plate and put the wallpaper on top of it, using it as a stencil to cut out your wallpaper; alternatively, you can paint the piece of paper provided (which fits into the plate) with the colour of the wall and mount it on the metal plate under the clear plastic plate. 

Switches & Sockets Specific
Back Box Depth 48mm
Brand Hamilton Litestat
Finish Satin Chrome
Gang 1
Insert No Insert
Plate Plastic
Plate Dimensions 86mm x 86mm
Style Flat Plate
Type Dimmer

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.