Aico Smoke Alarms

Every Tuesday there's a great reminder hashtag via Twitter, which is #TestitTuesday. From the different local fire departments to the responsible electricians and the Electrical Safety First, everyone reminds you: test your fire alarm, smoke alarm, or Carbon Monoxide alarm! We all follow quite a wide range of people on twitter or on Facebook, but what is warmly recommended is to follow your local police department, your local fire department, and the Electrical Safety First, all of which inform you of emergency and useful information you need to know. A regular testing of your alarm or those of family and friends will provide you with the peace of mind that, should a fire start, you will be warned ahead of time and you can escape. This is the basic idea behind the #TestitTuesday, and every Tuesday we test the alarms and we spread the word! Test-it Tuesday - It's time to Check your Smoke Alarms! It only takes a minute (or less) to test your smoke alarm, fire alarm, or carbon monoxide alarm: you simply have to press the button on the surface of the alarm for peace of mind! Most smoke alarms and CO alarms come with a 10 year battery back-up, and it will take quite a while until these need to be changed; what is needed, though is the periodical testing of the alarm to make sure it works. It is good to test your Carbon Monoxide alarm and Smoke alarm today, for the working alarms can save lives - and the life they could save can be your own! Simply by pushing the button on the smoke alarm could double your chances of survival, and it is recommended to do it every week. Since today is Tuesday - why not make it #TestitTuesday and test your alarm today! If the smoke alarm works, it saves lives; but if it doesn't work, lives may be in danger. How do I Test my Alarms? Advice from Aico A very frequently asked question is, I want to test my alarm, but how do I do it? Aico has a very helpful video explaining what needs to be done when you test your smoke alarm or CO alarm. Simply put, you can press the button in the middle for 10 seconds with your finger, or if you have an alarm controller, you can press the Test button. Similarly, you can test your alarms via the Aico Ei529RC/Ei410 fire alarm control switch by pressing the appropriate button. Tips for Testing the Smoke Alarm and Carbon Monoxide Alarm Every smoke alarm, fire alarm, and CO alarm has to be tested regularly to make sure they work properly. There has to be a working smoke alarm on every level in the house. Don't put it off: why not setting up a reminder on your phone that, when you know you're home, you test your alarm - and do it #TestitTuesday Be safe when you test the alarm: make sure you use a solid ladder or chair to reach the smoke alarm or CO alarm and test it. A smoke alarm will alert you at the earliest stage of a fire, giving you vital extra time to escape. Make sure you have one fitted on every floor of your home and test it every Tuesday! A carbon monoxide alarm will detect the colorless, odorless, and tasteless CO which may leak, and it will let you know when there's a risk. Test your CO alarm weekly! Clean the CO alarm / smoke alarm by gently wiping them with a cloth or with a soft vacuum brush, as dust can clog the alarms. Better safe than sorry! TestitTuesday for your elderly relatives or friends: why not make sure that they are safe too? If you don't have a smoke alarm, we recommend the RadioLINK enabled Aico smoke alarms which can wirelessly interconnect with similar alarms around the house. Find them here. What is a Carbon Monoxide alarm, what is Carbon Monoxide, and how can we get one? - read here more. Photo credit: ElecSafetyFirst here.

Sometimes the simplest of things can be very complicated if you don't know how to begin. It is the same with testing the fire alarms in the house: if you don't know how to do it, it is very complicated, but if you learn the simple way of testing the fire alarms, it is so simple. Aico is keeping you and your family safe from Fire and Carbon Monoxide since 1990. They make both fire alarms, smoke alarms, heat alarms, and Carbon Monoxide alarms - home life safety products - that your household can rely on. With their cutting-edge technology incorporated into their alarms, Aico leads the way in domestic fire and Carbon Monoxide (CO) protection; they are here to protect your loved ones and make sure your home is equipped with the highest quality smoke alarms. If you own an Aico fire alarm - a heat detector, a smoke detector, or a CO detector - you need to know how to test it from time to time. How do I test my Fire Alarm? How do we test our fire alarm? How can we make sure the fire alarm we have is working properly? These are valid questions and there's a very simple way to answer them: press that button to test your alarm! Aico put out a small video detailing the main steps to take in order to make sure that you test your fire alarm properly. There's always confusion about how to test the fire alarms, but we always recommend a button test. Whether you have a smoke, heat, multi-sensor, or CO detector, we recommend a button test to make sure the alarm is working properly. For a guide on what kind of fire alarms you need for your property, see this guide via London Fire.Step 1. Check the green light of the alarm is onFirst of all, you need to look at the fire alarm and make sure the green light is on. The light closer to the edge of the fire alarm should be green, showing that the alarm is ON and ready. If the green light of the alarm is on, you can proceed to the second step.Step 2. Press and hold the TEST buttonSecond, if the green light of the alarm is green, you simply need to press the TEST button. Depending on the model of the alarm - fire alarm, heat detector, smoke detector, CO detector, or multi-sensor fire alarm - the button is round and right in the middle of the fire alarm. Once you press the TEST button, there will be a loud beep from the alarm you're testing and also from the interconnected alarms. All the interconnected alarms will sound loud. The Aico fire alarms - especially the Aico 3000 range - are interconnected throughout the home, and once one fire alarm is tested, all the others will sound loud.Buy the Aico Fire Alarms at SparksStep 3. Repeat steps 1 and 2 with each alarm on the propertyAfter testing the first fire alarm, you can move on to the second alarm, then the third, then the fourth, etc until you have tested each alarm on the property. Testing a fire alarm is very simple; it is as simple as pressing a button because all you do is press that TEST button. In other words, simply put, testing a fire alarm from Aico is as simple as pushing that button. Push that TEST button to test your alarm and make sure you are safe! Video on how to Test your Aico AlarmsHere are a couple of videos detailing how to test your Aico Alarms - whether it is a smoke alarm, a heat alarm, a multi-sensor alarm, or a Carbon Monoxide Alarm.