Sale Icon
Review Icon
Free Delivery Icon

Aico Ei3000MRF SmartLINK Module for Wireless Interconnection SmartLINK and Data Extraction for Aico 3000

Model No. EI3000MR by: Aico
Availability: Usually 2 - 3 Days


List price £62.90
You save £20.13!
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

This is the Aico Ei3000MRF SmartLINK Module which allows for wireless interconnection and data extraction. You can simply plug in to any Aico 3000 Series alarms.

Please note: this item is non-returnable; due to the nature of this item, it has an electronic component and sensor, and we cannot take this item back for a refund as "unwanted".

Aico Ei3000MRF SmartLINK Module - Description

  • This is an optional add-on SmartLINK module for the Aico 3000 series of alarms to enable wireless interconnection with up to 12 SmartLINK and RadioLINK+ alarms and devices. It also facilitates a hybrid communication of hardwired and wireless connections. 
  • Installation: you can simply plug the module into the designated slot in the back of the alarm head; the antenna is fully enclosed within the alarm leaving no external parts on show. When the alarm is powered up, the RF LED on the side of the alarm will flash red, blue, and green to indicate that the module has been fitted correctly. 
  • This Aico Ei3000MRF is a short range device using a transceiver to  transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication.
  • House Coding: this feature confines the RF communication to designated RF devices only, thus avoiding an inadvertent activation of the neighbouring alarm RF systems. 
  • Remote Alarm Learn: this feature allows the installer to re-activate the entire RF system House Coding from just one device; additional devices can be added and house-coded accordingly. 
  • Functions: when the Ei3000MRF is plugged in, you get wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway (Ei1000G) and Portal.

Aico Ei3000MRF SmartLINK Module - Technical

  • Supply Voltage: Powered from Alarm
  • RF Frequency: 868MHz band (1% duty cycle)
  • RF Power: +10dBm
  • RF Protocol: Proprietary RF Protocol using multi-path, multi-repeater mesh architecture
  • RF Range: >100 metres in free air, 30 metres in standard property
  • RF Visual Indicator: Blue light flashes continuously for 0.5 to 3.5 seconds while transmitting RF signal
  • System Size: Up to 12 RF devices
  • Indicator LED’s: 3 colour LED: Blue, Green and Red
  • Data Monitoring: Via Ei1000G Gateway
  • Data Download: Via EiUSB1
  • Operating Temperature: 0°C to 40°C
  • Humidity Range: 15% to 95% relative humidity
  • Plastic Material: UL 94 V0 flame retardant
  • Dimensions – Product: 80mm x 18mm x 16mm
  • Dimensions – Boxed: 120mm x 110mm x 35mm
  • Weight: 10g (product only), 62g (boxed)
  • Guarantee: 5 years
  • Approvals: RF performance to EN 300 220-1 in accordance with EN 300 220-2, EMC performance to EN 301 489-1 in accordance with EN 301 489-3

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Choosing the Right Smoke / Heat Alarm with Wireless Interconnection

Advanced technology has made innovations in all types of devices possible, and this includes smoke alarms; it is important to choose the right smoke or heat alarm. A modern domestic smoke alarm still performs its fundamental task of detecting smoke, but now comes with a host of additional functions that will enhance the safety of tenants, while adding more flexibility. A good example of the new breed of advanced fire alarms came with Aico’s 3000 Series, which held a range of features never before seen on a fire alarm. With the 3000 Series, Aico combined cutting-edge intelligent design with SmartLink and AudioLINK capabilities, which enabled them to interlink and share data. Clearly, a new dawn of smart fire alarms is upon us. In this article, Sparks will explain why you should upgrade to an advanced wireless alarm system - if you haven’t done so already! Different type of Smoke Alarms It may be confusing to decide which type of alarm will best suit which area of your house. Aico has this detailed guide that gives advice on the placement of different alarm types. Ionisation sensors are recommended for use in bedrooms only, due to their sensitivity and propensity for triggering false alarms. Heat sensors react to fast-flaming, high-intensity fires, without detecting smaller particles from cooking fumes. They are recommended for use in garages and kitchens, where there is a serious risk of high-heat flames caused by grease fires. Optical sensors contain an infrared (IR) beam that detects smoke particles from slow, smoldering fires. They are designed to detect intense, smoldering flames emanating from the kitchen with their intelligent IR beams. It is important that we understand the difference in alarm types before we look at how they interconnect for our protection.Buy Smoke Alarms at Sparks Why have modern wireless alarm technology in your household? Building Regulations and BS 5839-6 are examples of British legislation that require landlords and homeowners to have interconnected alarms. This is important as it has made a huge impact on fire alarm manufacturers in recent years. Many have chosen to stick to alarms that are physically wired together, however, there are many problems with these systems. The chief reasons are that they can create significant disruption, interference and material damage. This problem can easily be avoided with the use of wireless systems and Radio Frequency (RF) signals. Installing alarms with wireless interconnection is straightforward once you get your various alarms to ‘talk’ to each other via the RF signals. This can be achieved with the click of a button in the case of Aico’s 3000 Series. Look at this guide on how to ‘House-Code’ Aico’s 3000 range here, to understand how effortless it can be. The advantages of a wireless alarm system Wireless systems have many benefits over hardwired systems, some of which are: Control of large systems from one switch When interconnected alarms became increasingly popular, the average household alarm system expanded in size. The reason is simply that the features made them easier to control from a single location. Make sure whichever system you choose, includes the Test, Silence, and Locate features. These are intrinsic to a large system as you can test and silence all alarms conveniently from a single switch. This means you can quickly identify whatever alarm was triggered. Using more advanced systems, such as Aico’s 3000 Series, you could also generate a RadioLINK+ report that would give you more detailed information about any alarm triggers. The compatibility of RF technology RF technology makes it extremely easy to connect different alarm types e.g. a fire alarm to an Aico Ei3018 Carbon Monoxide alarm. However, it also has the advantage of being able to interconnect with completely different devices. Modern fire alarms can be usefully linked to all manner of devices, like sprinkler systems for instance. Having a direct connection between a fire alarm system and a sprinkler system may be a life-saver, and is a great example of what modern technology offers to fire alarms. Data extraction Data extraction technology has real benefits for both residents and social housing providers. They can access information on battery back-up or battery life, alarm sensor status, the number of times tested and removed and alarm activations. This is great for landlords as they can ensure they are complying with government regulations. More advanced systems, such as Aico’s 3000 Series, are able to generate an AudioLINK+ report for this comprehensive information.Buy Wireless Interconnected Alarms Aico: customer safety and convenience first It is reassuring to know that manufacturers have a responsibility to guarantee that any ‘next-gen’ alarm is easy and intuitive to use (as well as to install). We hope this guide helps you to choose the right smoke or heat alarm. As well as making their alarms simple to use and connect, Aico offers practical training and advice delivered to your home. Their Mobile Training & Demonstration Units deliver detailed smoke and carbon monoxide (CO) alarm product and technology information, and well-accredited training. Aico have taken their responsibility for consumer safety very seriously.

Aico Alarms Fault Finding - 10 Questions and Answers, Aico Heat, Smoke, CO Alarms

As with most technology, you may experience technical faults with Aico’s range of alarms. Aico has a helpful page for basic fire alarm and cleaning maintenance advice. This Sparks guide goes into more depth concerning Aico alarms fault-finding. We will advise you on how to resolve various issues that may arise, and ten of these questions we try to answer are: Why is my smoke or heat alarm sounding for no reason? Why is there a regular single beep coming from my smoke or heat alarm? Why is there an irregular beep coming from my smoke or heat alarm? Why aren’t my alarms interconnecting via RadioLink+ interconnect? Why aren’t my alarms interconnecting via hard-wired interconnect? How do I fix the test button, if it isn’t working? Why aren’t alarm accessories working with all or some alarms? Why is my Carbon Monoxide (CO) alarm sounding? Why is my Carbon monoxide alarm giving a regular single beep? Why is my CO alarm beeping irregularly? Why is my smoke or heat alarm sounding for no reason? Identify the alarm with the flashing red light. Press the ‘Hush’ button to silence it. If this doesn’t work, clean the alarm using a vacuum. Wait for 10 minutes and the problem should be resolved. After dealing with the errant alarm, take the following steps: If using RadioLINK+, ensure that the alarms have been properly House-Coded. Reset and House-Code the RadioLINK+ system. Check that any old hard-wire interconnection wires have been disposed of. See if there are any cooking fumes or steam around the alarm in question. If this is the case, it may be situated incorrectly for the alarm type. Look into where your alarm should be placed. Sparks sells Aico’s Ei3014 heat alarm, and Ei3016 optical smoke alarm, as well as other heat and smoke alarms. We also suggest you read more about the recommended sites for locating these alarms. Why is there a regular single beep coming from my smoke or heat alarm? If the green power light is off, check your fuses and wiring. If the alarm is a 140RC Series, detach the alarm from its base and change the battery. Why is there an irregular beep coming from my smoke or heat alarm? Check the wiring (and connection) of the alarm. Find any gaps where cables enter the base of the alarm. Fill in these gaps so that cold air is unable to enter. Look to see if there is anything on the same circuit that could be causing electrical interference. For instance, a central heating pump on the same circuit may be creating problems. Clean the alarms thoroughly.Buy Aico Domestic Fire Alarms Why aren’t my alarms interconnecting via RadioLink+ interconnect? Press and hold the ‘Test’ button for 10 seconds. Ensure that your alarms have been House-Coded. See that the earth cable hasn’t been wired into the ‘IC’ terminal. If the wire insulation has been tested with high voltage, replace the alarms and bases. Face the bases of the replacement alarms in the same direction, to maximize signal strength. Why aren’t my alarms interconnecting via hard-wired interconnect? Press and hold the ‘Test’ button for 10 seconds. Examine interconnecting wires to ensure they are wired properly. Check for short circuits. This is a circuit that allows current to pass along an unintended path. If the Live and Neutral wires have become entangled, the alarm will be impaired. See the wiring guide for advice on how to fix the wire and replace the alarm. How do I fix the test button, if it isn’t working? Press and hold the ‘Test’ button for 10 seconds. Establish that the alarm is connected to the base. Why aren’t alarm accessories working with all or some alarms? Ensure the alarms and their accessories are compatible. On a RadioLINK+ system, make sure they are House-Coded. If the hard-wired system is interconnected, make sure all the connections and wiring are correctly positioned for alarms and their accessories. See that the units are receiving power and all switches are turned on. Check if the alarms themselves are operational. is my Carbon Monoxide (CO) alarm sounding? Be very careful; there are likely to be dangerous levels of carbon monoxide present. Turn off the appliance and open all windows and doors. Then leave your home. Call the emergency number for the gas or fuel supplier. Do not re-enter the property until the alarm has stopped. Use an AudioLINK report to extract details about the incident (if applicable to the alarm). Note: Sparks sells Aico’s Ei3018 CO alarm, along with many other CO alarms. We’d suggest you read over the recommended sites for alarm placement.Buy Carbon Monoxide Alarms Why is my Carbon monoxide alarm giving a regular single beep? If the green light is off, examine the fuses and wiring. Use an AudioLINK report to extract details about the incident (if applicable to the alarm). Why is my CO alarm beeping irregularly? Examine the wiring and connections. If the green light has gone out, check the fuses. Check to see if there is any other appliance on the same circuit that could be creating electrical interference. Use an AudioLINK report to extract details about the incident (if applicable to the alarm). We hope this article has given you answers to any questions you may have regarding faults with Aico alarms. As you can gather from this guide, most problems are easy to address and solve in a few steps. Aico’s site has fantastic technical support if you find yourself in need of it.

How Aico 3000 Series offers a Full Circle Protection with Intelligent Design

The Internet of Things (IOT) has many appliances in day-to-day life, but with Aico 3000 Series it could grant you one of the most crucial functions an appliance can: saving lives via the miracle of wireless interconnectivity. With the 3000 Series, Aico fuses cutting-edge intelligent design with SmartLINK and AudioLINK capability to create the most advanced alarm systems ever made. Available for all parties - landlords, contractors and residents alike - this is a comprehensive system that will save time and money, as well as ensuring maximum home fire safety. Intelligent design for intelligent protection: 'Full Circle Protection' offered by the Aico 3000 Series Full Circle Protection combines Fire and CO alarms and offers you all-encompassing protection: both in terms of initial fire protection and the analysis and monitoring of your fire alarm data. In 2018, Aico launched the 3000 Series of Fire and CO alarms, that included their innovative 'full circle' protection. The Managing Director of Aico stated that: The 3000 Series represents one of the most significant advances of the Aico product range in recent years. It's the coming together of the very latest alarm technologies ... we refer to the 3000 Series as having 'intelligent simplicity' - we've built intelligence in to every alarm.A prime example of Full Circle Protection is the Aico 3024 Multi-Sensor alarm from the 3000 Series. The Multi-Sensor technology in the Aico 3024 contains two types of sensors: heat and optical, that guarantee you a complete fire response. The infrared optical sensor is made of a bonded protective mesh that encapsulates the whole sensor to keep out potential contaminants such as dust and insects. This drastically reduces the risk of pesky and disruptive false alarms. The heat sensor includes a new thermistor which gives a quicker alarm response when the monitoring temperature rises, and will trigger at the dangerous temperature of 58 degrees.  The Ei3024 can be easily fitted with an Ei3000MRF module that enables wireless interconnection and data extraction, which brings us to two of the huge selling points of the Ei3024 and the 3000 Series: SmartLINK and AudioLINK.Buy Aico Multisensor Alarm How SmartLINK is integral to the Aico 3000 Series 'Full Circle Protection' ethos The SmartLINK is an extension of Aico's brilliant RadioLINK+ functionality, adding a whole new range of functions and features for your convenience in the IoT era. Once you have plugged in the Ei3000MRF module, you will receive all the benefits afforded to you by RadioLINK technology: no need for cable runs and alarms interconnected via Radio Frequency (RF). SmartLINK also offers ‘Remote House Coding’, making House Coding new alarms into the system even easier. House Coding simply ensures that when one alarm in the system is triggered, the rest are too, and a guide on how to set up a House Coding system can be found here.  With Remote House Coding, you can easily expand the reach of your home alarm system, and save time on installation as you can enter a unique code for each individual alarm directly onto the alarm itself. Other useful features for the SmartLINK include real-time configurable notifications, forecast alarm replacements, and maintenance and remote alarm learn entry (which allows the installer to reactivate the entire RF system House Code from a single device). How AudioLINK rounds off the 'Full Circle Protection' of the 3000 Series AudioLINK data extraction ensures that you can use data for unit reports, then sends an Alarms Status report delivered directly to your smart phone or tablet via a free app.  This useful Report includes alarms activations, sensor statuses, records of usage, battery and backup cell status, CO levels recorded, background levels of CO and advice on dust contamination levels. The Alarm Status Report provides evidence required for the maintenance of records that is required for private Landlords renting out properties within the UK. Data can be extracted from the AudioLINK alarm repeatedly, and information is stored for life, enabling re-checking of historic records; with report storage and sharing, all of your information can be emailed directly from your device to single or multiple addresses.  For Landlords, UPRN numbers, landlord details, and contractor details can be added to the report.  It can also be sent as a PDF report or a .csv file for integration with housing management and maintenance systems; ideal for a Landlord with multiple properties to check in on.Extraction of data can be done in 3 easy steps: press the alarm 3 times, allowing the alarm to emit a number of beeps which your phone will pick up, then the AudioLINK App will generate and display the Alarm Status Report.Buy Aico 3000 Series Fire AlarmsThe Aico 3000 Series is the most intelligent home alarm protection system out there Included in the 3000 Series is the Ei3018 CO alarm, Ei3016 Optical Smoke Alarm, the Ei3028 Heat and CO alarm and the Ei3014 Heat Alarm. The interconnectivity between the 3000 Series, made so simple by the Ei3000MRF module, means that you can comprehensively protect your property and stay informed at all times. Place an Ei3014 Heat Alarm in your kitchen or garage, an Ei3016 in your landing or hallway and an Ei3028 or Ei3024 in your bedroom, dining room or living room. They will all communicate via RF, and with SmartLINK and AudioLINK, will guarantee you Full Circle Protection. This intelligent IoT system will give you a complete overview of your fire-protection system. With full data extraction reports, underlying RadioLINK connectivity and real-time notifications straight to your mobile you'll be placed at ease, knowing the 3000 Series has you protected.

All about the Aico SmartLINK RF Wireless Interconnection

When Aico came out with their 3000 series, they also came with the Aico SmartLINK next-generation Radio Frequency Wireless Interconnection. Now their latest fire alarms, heat alarms, Carbon Monoxide alarms, and multi-sensor alarms can be interconnected wirelessly! They made it smarter, easier, and future-proof. They basically took their renowned RadioLINK+ technology and added a new range of functions and features to obtain the Aico SmartLINK RF wireless interconnection. In this article, we would like to introduce the SmartLINK technology from Aico - award-winning Radio Frequency (RF) Wireless Interconnection and Data Monitoring technology: About the technology, Aico on SmartLINK gateway, house coding the alarm system, and the SmartLINK gateway.About the Aico SmartLINK RF Wireless InterconnectionConstantly being at the forefront of the interconnection technology for the fire alarm system, Aico continues its development in this realm from RadioLINK to RadioLINK+ and now with Aico SmartLINK. This new SmartLINK technology provides the same proven wireless interconnection technology as RadioLINK and RadioLINK+. It uses Radio Frequency signals and is completely compatible with both existing systems. Here are its most interesting features:RF Signals - no more tricky cable runs to interconnect the alarms, for the Aico SmartLINK RF Wireless Interconnection is cable-free!Wireless Interconnection: when one of the alarms is triggered, all the others sound loud for everyone around the property to hear.Expandable System you can simply expand an existing system by easily adding in Aico SmartLINK technology. Remote Monitoring and Data Extraction: with Aico SmartLINK you can now achieve remote whole-system data monitoring and extraction even when access is not possible. Tip: add the Aico SmartLINK technology to your system simply by plugging in the Ei3000MRF SmartLINK module into any Aico 3000 Series alarm head. Buy the Aico SmartLINK moduleAico on SmartLINK GatewayHere's what Aico has to say on their SmartLINK Gateway:"Aico has launched the SmartLINK Gateway to provide a groundbreaking solution for Registered Social Landlords to have access to real time data insight into the status of the Smoke, Heat and Carbon Monoxide alarm systems across their entire housing stock. Using its built-in GSM data connection, the Ei1000G utilises Aico’s next generation of wireless technology to report events including Fire/CO activations and alarm head removals as they happen to the SmartLINK cloud portal, for full visibility and remote monitoring. The Ei1000G SmartLINK Gateway aims to improve efficiency, reduce costs, aid with forecasting and compliance and enable smart asset management. The SmartLINK Gateway will revolutionise the way in which alarm systems are managed, paving the way to a solution-focused approach to asset management."Watch the full video via, SmartLINK RF Wireless Interconnection - House Coding the Alarm SystemIf you want to make sure that all alarms in your system sound when one of them is triggered, they must be interconnected; this means they must be house-coded together. When they are house-coded in this way, the alarms will learn each other as a system, and they will ensure a secure interconnection, having no cross-signals with any neighbouring systems. Aico made House Coding very simple to reduce time at installation; at the same time, it is secure and reliable. Visit this link to learn How to set up a SmartLINK, RadioLINK+ and RadioLINK interconnected system (House Coding). If you want to expand a system with extra alarms in the 3000 range from Aico so that you get increased coverage, this is very easy. With Remote House Coding you eliminate the disruption of running new cables to interconnect the fire alarms and you also save time at installation. It is now easy to add alarms to an existing system with Aico House Coding. Buy the Aico SmartLINK GatewayThe SmartLINK Gateway - Real-Time Notifications, Alarms, and EventsThe Aico Ei1000G SmartLINK Gateway enables real-time configurable notifications of alarm activations and events. When you install the Gateway and portal system, you have full visibility of your connected SmartLINK system. The Gateway and Cloud portal use Aico’s SmartLINK technology to bring together data from all SmartLINK-enabled alarms in a property in a simple, online dashboard format – so viewing and managing them is easier and more effective. Connected devices’ events are processed by the Gateway as they occur and cover events such as:Fire AlarmCO level detected (High, Medium, Low)Button TestMains Absent FaultHead OKHead RemovedEnd of lifeNote: Reportable events are model-dependent.Full details about the Aico SmartLINK technology can be found on their dedicated page, and you can purchase the Aico 3000 series on our website here. Plus, the Ei3000MRF SmartLINK module is here. 


Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.


We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.