Batten Mounted PIR Occupancy Switch with Intelligent Photocell (5m version)

Model No. BPIR5M by: Danlers.
£32.21 Ex. VAT
List price £37.90 You save £5.69!
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Normally In Stock

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare
This is the Danlers batten mounted PIR occupancy switch with Intelligent photocell - batten mounted PIR switch - the 5m version. The Danlers Batten mount passive infra-red occupancy switches (PIR) with ‘Intelligent’ Photocell can be mounted onto the end of lighting battens via the 20mm knock out. The switch includes the connection 20mm thread and 1m of wire tails to connect to the lighting ballast.
The BMINTPIR5M incorporates a passive infra-red quad sensor to detect movement of a warm body within the detection zone. On detecting movement, if the ambient light is dark enough, the PIR will switch the load on. The ambient threshold can be set by the user to between approximately 100 and 3000 lux (on the working plane) via the LUX adjuster.
BMINTPIR5M operates with “ACTIVE” Lux control. It constantly samples the ambient LUX level and will, even if the area is occupied, switch off the controlled lamps (if the lux rises above the user set threshold and remains there for the overlux timeout period). If the artificial lights are ON and the LUX then rises greater than the set threshold (plus the “stored calibrated hysteresis” – saved during calibration) the product will then switch the artificial lights off after a preset time delay.
  • The calibration process removes the site specific addition of artificial light from any decision to switch the lights on/off.”
  • This technology has a GB patent pending No: 1219746.3.
  • BMINTPIR5M has user feedback including a "real time" photocell status indicator: Green LED illuminated indicates sufficient ambient light - load turns off after threshold delay.
  • If no more movement is detected within a certain time, then the PIR will switch off the load. The time can be set via the internal TIME adjuster to between 10seconds and 40 minutes.

NOTE: It is advised that this product is only used in environments where some natural light is available.

  • Weatherproof: IP53 rating
  • Detection range: Up to 5m
  • Detection angle: 100°
  • Time lag: 10 seconds to 40 minutes (adjustable)
  • Photocell range: 100 lux to 3000 lux (adjustable)
  • Loading:  
    # Up to 10 amps (2500W) resistive loads and tungsten.
    # Up to 6 amps (1500W) fluorescent (switch start).
    # Up to 3 amps (750W) electronic or wire wound transformers, compact fluorescent or LED lamps.
  • Dimensions: 120 x 50 x 36mm plus 1 metre wire tails


Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2016 SparksDirect

Award Winning Ecommerce from Cyber-Duck