BG CUMC10 10A Type C MCB Single Pole 6kA Breaking capacity Miniature Circuit Breaker for BG Consumer Units

This is the BG CUMC10 10A Type C MCB Single Pole 6kA Breaking capacity Miniature Circuit Breaker for BG Consumer Units. 

BG CUMC10 10A Type C MCB Single Pole - Specs

• All MCBs have a positive contact status indicator, i.e. when green window is visible this indicates that there is a 4mm contact gap.
• Stylish modern profile, matches all other BG devices.
• Positive contact status indication
• Lockable dolly switch
• Large terminal capacity
• Device capable of being locked in ‘ON’ or ‘OFF’ position using a device lock
• Type AC, C Curve
• Rating: 10A MCB
• Standard(s): EN/IEC 60898
• Breaking capacity: 6000A
• Rated voltage: 230/400V a.c. 50Hz
• Rated Insulated Voltage: 500V
• Rated Impulse Withstand V: Uimp 6000V
• Energy Limiting Class: 3
• Ambient Temperature: -5ºC to +40 ºC
• Operating Characteristics: Type C - Magnetic Operating 5 to 10 times In (current rating)
• No. of Poles: 1 pole
• Trip: Thermal/Magnetic release
• IP Rating: IP20
• Terminal Capacity: 16mm²
• Terminal Torque: 2NM
• Installation: Mounting on 35mm DIN rail
• Size: 17.5mm width
• Endurance Operations: Electrical 4,000, Mechanical 10,000

To fit this device onto DIN rail, fit top of device onto rail first and then push down bottom of device until retaining device clip ‘clicks’ and locks onto DIN rail.

To remove this device, pull out retaining device clip from bottom of MCB (using flat screwdriver) and remove by lifting bottom part of MCB first.