Your shopping cart is empty!
The CONBOXC flow connector was designed to be a timely solution to the problems encountered by electricians when testing lighting circuits.
By failing to disconnect transformers or ballasts from the circuit, the ‘Mega’ test would ‘blow’ the electronics, incurring additional cost and labour, and sometimes even risk.
The CLICK flow connector / the CONBOXC lighting connector now facilitates the simple temporary disconnection of the electronics from the luminaire while the MEGA 1000V test is carried out(check out the CONBOXC and the Eurika Innovative Solutions).
The CONBOXC Male and Female lighting connector, 16A plug-in flow connector(CLICK CT101C connector) - The Click CT101C Flow Connector / The CONBOXC Lighting Connector
For safety reasons, the male and female connectors in the CLICK flow connector / the CONBOXC lighting connector can only be mated in one way.
The male section is designed for use with cable dimensions of 1.5mm² 3 core maximum with cord restraint for flex and the female with 3 x 2.5mm² twin and earth (with additional loop terminal).
Since they are being designed for 250V~ 20A Max. applications, the connectors have ‘backed off’ screw terminals with slotted/cross heads.
The CONBOXC lighting connector / flow connector incorporates an all-in-one junction box and large terminals for easy access.
Designed initially for lighting circuits to enable isolation of transformers, control gear, etc while conducting the MEGA 1000V Insulation Resistance Test.
The CONBOXC is definitely a versatile easy-connection system for fixed wiring applications.