ControlZAPP Ceiling Flush Control for Switching & Dimming 1-10VDC Ballasts, Programmable CZCEFLP10VDC

This is the Danlers ControlZAPP CZCEFLP10VDC, a programmable energy saving control for switching applications - ceiling flush mounted. Suitable for switching and dimming 1-10VDC ballasts.

This multi-functional controls is ideal for flush mounting through suspended or plasterboard ceilings. Programmable by Android phone (4.3 or later) or tablet via Bluetooth Smart. Easy to configure interface enabling greater energy saving, safety and security. Ideal for Lighting Control etc.

Danlers CZCEFLP10VDC - Features and Benefits 

• Passive Infra-red occupancy switching
• Patented ‘Intelligent’ photocell calibration
• Current light level indicator on APP to assist setting switching threshold
• Lighting load can turned ON or OFF by APP to assist setting accurate maintained lux
• level (daylight linked dimming)
• Current light level indicator to assist lux switching threshold when setting up
• Accurately timed override ON or OFF
• Accurate ‘Real time’ clock with battery back up when powered off
• Automatic Daylight Savings Time (BST) correction with offset adjustment
• Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP
• ControlZAPP Programmable Energy Saving Control for Switching and Dimming 1-10V DC Ballasts
• Upload indicator to ensure successful programming
• LED indicator for presence recognition within its detection range (can be turned off)
• Override possible via phone or tablet, up to 100m range
• Groups of ControlZAPP devices can be controlled together
• Password protection - safeguarding against accidental or malicious interference
• Ideal for: offices and commercial premises, factories and warehouses, retail and display, hotels and leisure, shared accommodation, education and healthcare, plus many other applications.

Technical Specifications

• Voltage: Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode).
• Loading: Suitable for switching and dimming 1-10VDC ballasts. Can control up to 20mA, eg. 20 ballasts at 1mA (varies according to make and model of ballasts). Total load of ballast, lamps plus other load not more than 6 amps including fluorescent.
• Detection range: 360° with 7m diameter when mounted at a 2.4m ceiling height.
• Time Lag: Easily adjusted by APP to individual requirements from 10 seconds to 24 hours.
• Short Visit Time: Easily adjusted by APP to individual requirements from 10 seconds to 24 hours.
• Lux: Enabled: 30 to 1000 lux. Can be also disabled.
• Sensitivity: Adjustable via APP.
• Dimming Output: 1-10VDC.
• Device Dimensions: 85mm diameter x 79mm. Requires 73/75mm diameter hole in false or plasterboard ceiling. Ceiling void at least 78mm deep.
• Power Supply dimensions: 120 x 50 x 32mm.
• Telejack Connector: 180mm in length.
• Product code: Danlers ControlZAPP CZCEFLP10VDC

Additional Features

• Accurate ‘Real time’ clock with battery back up when powered off
• Accurately timed override ON or OFF
• Active or Passive PIR occupancy switching
• Patented ‘Intelligent’ photocell calibration
• Automatic Daylight Savings Time (BST) correction with offset adjustment
• Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP.
• Upload indicator to ensure successful programming.
• LED indicator for presence recognition within its detection range (can be turned off).
• Manual Group Control ON / OFF / RESUME feature on APP
• Also supplied with Telejack Connector (not in the picture) to connect ControlZAPP device with its power supply.

Need more detailed specs?

• danlers-ControlZAPP.pdf (1.72 MB)