CP Electronics EBDSPIR Ceiling PIR Presence Detector with Lux Level Adjustment and Time Delay

Model No. EBDSPIR by: CP Electronics.
£46.45 Ex. VAT
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Max 3-5 days delivery

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This is the CP Electronics EBDSPIR ceiling flush mounted presence detector PIR providing automatic control for lighting, heating, and ventilation loads. This compact PIR sensor can be mounted in a ceiling tile or using a surface mounting box. It is a low profile device allowing you to install it in a narrow ceiling void, with no external control boxes required (this unit is self-contained). 

This is the CP Electronics EBDSPIR - a compact, flush mounted, ceiling PIR presence detector for interior use with lux adjustment and time delay. This compact PIR detectors provides automatic control for lighting, heating and ventilation loads. The PIR sensor can be mounted either flush into a ceiling tile or using a surface mounting box. It has a low profile design, it comes in a self contained unit, it is pluggable and infrared programmable, and the 5 year warranty is included. 

The CP Electronics EBDSPIR detects movement using a PIR sensor and turns the light / fan / heating ON; when the area is no longer occupied, the light / fan / heating will be switched off after a time out period. Also, when an area is occupied, lighting is only switched ON when the level of natural light is below a preset level - there's a lux level adjustment. 

CP Electronics EBDSPIR - Technical Specifications

  • Connections: plug in connections, reducting installation time. 
  • Functions: PIR presence detector with lux level sensing and time delay function. 
  • Adjustment: manual adjustment only. 
  • Mounting: ceiling mounted PIR detector.
  • IP rating: IP40 rated
  • Weight: 0.15kg
  • Supply voltage AC: 230 VAC +/- 10%
  • Supply frequency: 50Hz
  • Power consumption parasitic: 895mW
  • Terminal capacity: 2.5mm2
  • Working temperature: -10 to 35 degrees C
  • Material (casing): flame retardant ABS and PC/ABS
  • Insulation class: class 2
  • Compliance: EMC-2014/30/EU, LVD-2014/35/EU
  • Cutout diameter: 64mm
  • Dimensions: face plate diameter 76mm x 4mm height / projection; max. depth: 65mm. 
  • Load:
    8 Amp resistive and incandescent lighting
    6 Amp fluorescent lighting
    3 Amp compact fluorescent lighting
    3 Amp low energy lighting
    3 Amp low voltage lighting (switch primary of transformer)
    Fluorescent lighting (max 6 fittings recommended). For fluorescent lighting total power factor correction capacitance must not exceed 40µF.
    3 Amp fans and ventilation equipment
    Switch SON lighting loads via a contactor
  • Supply voltage: 220-240 Volts AC 50 Hz
  • Time out period: Adjustable 10s to 30m
  • Light level: Light to dark

Note: this CP Electronics EBDSPIR must be installed by a qualified electrician in accordance with the latest edition of the IEE wiring regulations. 

 

Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2018 SparksDirect

Award Winning Ecommerce from Cyber-Duck