The RBT1 is a high output, electronic run back timer. Its powerful 20A output makes it particularly suitable for the control of immersion heaters. The unit allows an appliance to be powered for a set time period which can be adjusted by the user. A simple display shows the user how much time is left to run. An ON/OFF switch allows the user to cancel the timing program whilst a memory remembers the last timing sequence selected.
CP Electronics RBT1 High Output Run Back Timer
20 Amp resistive load (including immersion heaters)
6 Amp fluorescent lighting
3 Amp compact fluorescent lighting
3 Amp low energy lighting
3 Amp low voltage lighting (switch primary of transformer)
Fluorescent lighting (max 6 fittings recommended)
Supply voltage: 220-240 Volts AC 50 Hz
Time out period: 15 minutes to 2 hours in 15 minute increments
Surface fixing 25mm deep plastic surface mount moulded box.
Flush fixing 25mm steel wall box or 32mm deep cavity wall box.
Terminal capacity: 4.0mm2
Material: Flame retardant ABS
Class 2 electrical rated
Temperature: -10°C to 35°C
Conformity: EMC-2004/108/EC, LVD-2006/95/EC, CE Mark
Dimensions: 86 x 86mm plate, 19mm projection (+2mm the buttons), 12mm in the wall.
Note: This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.