Dimming Pull Cord Switch for Bathroom with White and Chrome Covers (max. 250W load)

£23.90 Ex. VAT
List price £34.20 You save £10.30!
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Max 3-5 days delivery

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This is a pull cord switch for bathroom lights with a pull action for ON/OFF switching and a prolong pull for dimming action. Comes in a polycarbonate white finish and has a chrome effect cover. It is not suitable for fluorescent lamps, but it can work with incandescent loads (up to 250W) and transformer loads (up to 175W).

Note: this dimming pull cord switch is NOT suitable for LED lighting (it is not recommended to use this item with dimmable LED lights).

  • Pull action for on / off or prolong pull for dimming
  • Polycarbonate / White and chrome effect covers supplied
  • Not suitable for fluorescent lamps
  • Max 250W incandescent load / 175W transformer load
  • Neutral terminal (neutral not required for operation)
  • Ceiling rose dimensions: 78mm diameter, 43mm projection
  • This dimming switch is suitable for indoor use.
  • This switch is suitable for use in living areas, bathroom zone 2 and outside (safe) zones only (see the diagram and current IEE Wiring Regulations for details). It is not suitable for bathroom zones 0 or 1.
  • If being fitted in a bathroom a 30mA RCD must be used.
  • CE Mark, class 2 electrical rated. 

The pack contains: 

  • 1 x White dimming pull switch with matching white toggle
  • 1 x Optional chrome effect cover with matching chrome effect toggle
  • 1 x Fixing kit

How this Dimmer Pull Cord Switch Operates:

  1. To turn on: pull the cord downwards once and release. The light will always come on at full brightness regardless of the level when it was last switched off.
  2. To turn off at any time: pull the cord downwards and release.
  3. To dim lighting: pull the cord downwards and hold until the required light level is achieved then release.
  4. To adjust lighting level when already on: pull the cord downwards and hold until required level is achieved.

Note: The pull switch has a quiet actuator so you will not hear a click sound when operating this switch.


Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2017 SparksDirect

Award Winning Ecommerce from Cyber-Duck