Rotary and Push LED Dimmer Module 5W - 250W (leading edge) 2 Wires for Dimmable LED Lamps

Model No. DPDLED by: Danlers
Availability: Usually 2 - 3 Days

£14.20

Ex. VAT
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

The Danlers DPDLED is compatible with many dimmable LED lamps and fittings. Ideal to retrofit onto many existing wall plates or can be fitted onto Original Equipment Manufacturers own plates. It can be used in 1-way or 2-way switching circuits and fitted with a thermal fuse for short circuit protection. 

  • DANLERS push and rotary 2-way ‘leading edge’ LED dimmer modules are ideal for retro-fitting onto many  existing wall plates or for other equipment manufacturers to add to their own plates.
  • Press the knob to turn the lamp on and off, rotate it clockwise to brighten the lamp and anti-clockwise to dim it.
  • Each DPD LED has an adjustable trim spindle on the end of the dimmer module for designating the minimum dim level. The lamp can be switched from other locations by using standard 2-way and intermediate wall switches. It cannot be dimmed from another location and no other dimmer should be connected into the same switch circuit.
  • DANLERS push and rotary 2-way ‘leading edge’ LED dimmer modules are compatible with many reputable LED lamps and fittings. However, DANLERS cannot guarantee that these dimmers will successfully dim ALL LED lamps and fittings. The dimming performance of LED lamps and fittings may vary when different types of lamps are fitted in the circuit.

Rotary and Push LED Dimmer Module 5W - 250W - Specs

  • Product code: Danlers DPD LED
  • Push On / Push OFF, with rotary dimming control.
  • Can be used in 1-way or 2-way switching circuits.
  • Thermal fuse for short circuit protection.
  • This product conforms to BS EN 60669-2-1 and BS EN 55015:1993
  • Rotary and Push LED Dimmers (leading edge).
  • Adjustable spindle on the back of the product to specify the minimum dim level to help eliminate lamp instability.
  • This Danlers push and rotary 2-way 'leading edge' LED dimmer module is compatible with many reputable LED lamps and fittings.
  • To eliminate lamp instability, this item is fitted with an adjustable spindle to the back to specify the minimum dim level.
  • IP rating: non-IP rated, no special protection against dripping, spraying, submersion into water.
  • Maximum load: 250W
  • Mains voltage: 240V
  • Minimum load: Due to the characteristics and ever changing design of different lamp manufacturers LED drivers DANLERS cannot specify a universal accurate minimum load. However, the adjustable spindle on DPDLED can help to eliminate lamp instability in many LED lamps and fittings. 5W is the optimum minimum load on LED lamps tested by DANLERS. However due to the variable nature of LED lamp drivers we cannot guarantee 5W is the minimum with ALL LED lamps and fittings. 
  • Dimensions: 25mm width x 60mm length x 30mm depth; spindle length 20mm

Note: if you are looking for an LED dimmer for your table lamp, ceiling light, wall light, etc, before purchasing the dimmer please make sure that the LED light bulb is dimmable and that the total wattage of the LED light/s is included in the dimming range of the LED dimmer you're choosing. 

Switches & Sockets Specific
Back Box Depth 35mm
Brand Danlers
Finish White
Gang 1
Insert White
Plate Plastic
Plate Dimensions 25 x 59mm
Style Grid Module
Type LED Dimmer

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.