Rako RCM-070 7 Button Wireless Wall Control Panel, 7 Button RF Push Button Module (requires face plate)

This is the Rako RCM070 7 button lighting 4 scene off + raise lower control module. It is wireless, battery powered, and comes in a black finish; it requires a faceplate - see the Required items for the correct finish.

Please note: this item is non-returnable; due to the fact that it has an electronic component, we cannot take this item back for a refund.

The RCM-070 button panel has addressing switches on the back to setup rooms and houses. Setting two panels with the same addresses allows two way control within a room. The panels select scenes stored within the dimmers, so having more than one such wall panel does not give you more scenes.

This wireless panel can either be surface mounted (using the patress, which gives a depth of 14mm), or flush mounted (into a standard single gang UK back box). 

The Rako RCM070 7 button wireless controller is Lithium battery powered with battery life calculated as being 3 years (based on pressing a button 30 times a day); you don't need to run cabling - you can mount this controller anywhere in the house.

The RCM wireless control modules have a "hard button" design and are styled to match the WCM range of wired control panels. They require a front plate (which needs to be ordered separately), and they can be installed as surface mounted. 

It is based upon the widely used 50mm x 50mm Euro Module switch plate accessory standard, so it is suitable for all switch plates that use a 50mm x 50mm grid and cover plate arrangement. No need for data or power cabling, since it has the Rakom coded radio transmission, ensuring the system is installed with no fuss or disruption. 

Rako RCM-070 Wireless Wall 7 Button Panel - Technical Specifications

• Fixing: it can be flush mounted into a standard UK single gang back box, minimum 12mm deep. When surface mounted, use a standard single gang UK or European back box or direct to flat surface.
• The unit provides full scene programming.
• Input supply: 6V DC given by 2 x 3V Lithium coin cell CR2016 (remote power supply version available)
• Weight: 100g
• Battery life: more than 3 years
• Dimensions: 50mm x 50mm x 12mm when it is flush mounted, and 92mm x 92mm x 14mm when it is surface mounted
• Standards: Emissions EN61000-6-3 : 2001, Immunity EN61000-6-1 : 2001
• Memory: uses flash memory (non volatile) 
• Wireless communication: Rakom coded fm radio, 433.9MHz
• Climate range: Temperature +2 deg C to +40 deg C, humidity +5% to 90% non-condensing

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• RCM070.pdf (437.11 kB)
• RCM070-cover-plates.pdf (436.64 kB)
• RCM070-intro.pdf (116.24 kB)