Wireless Dimmer Module 1 Zone - Single Colour RF Knob Remote Controller FossLED RDS-RF

This is the Wireless Dimmer Module 1 Zone - Single Colour RF Knob Remote Controller FossLED RDS-RF available at Sparks Electrical Wholesalers for the best price. 

Note: this wireless dimmer requires a battery, and it is suitable to work only with the FossLED FLDC1S (RF) and FLDC5Z-WIFI (RF & WIFI) Receivers for Smart Control Integration - to be ordered separately. 

The fossLED Wireless Dimmer Module is an innovative RF controller, compatible with traditional faceplates (not included). RF 2.4GHz wireless technology, control distance up to 30m (Barrier-free space).

Please allow for 12m within areas restricted by obstacles.

Each remote can match to one or more receivers.

Two power supply options: 5-24VDC power supply or CR2032 battery. Compatible with fossLED FLDC1S (RF) and FLDC5Z-WIFI (RF & WIFI) Receivers for Smart Control Integration.

Wireless Dimmer Module 1 Zone - Single Colour RF Knob Remote Controller - Features

• The fossLED Wireless Dimmer Module is an innovative RF controller, compatible with traditional faceplates and available in three variations:
  RDS-RF: Single Colour Rotary Dimmer Module RF (this particular item);
  RDT-RF: Tuneable White Rotary Dimmer Module RF
  RDY-RF: RGBW Rotary Dimmer Module RF
• RF 2.4GHz wireless technology, control distance up to 30m (Barrier-free space). Please allow for 12m within areas restricted by obstacles.
  
• IP20 rating, dust resistant only, no resistance to moisture or water.
  

• Each remote can match one or more receiver.
• Two power supply options: 5-24VDC power supply or CR2032 battery.
• This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognized electrical and safety regulations relevant to the country it is being installed.
• Compatible with fossLED FLDC1S (RF) or FLCD5Z-WIFI (RF & WIFI) Receivers for Smart Control Integration
• Compatible with traditional faceplates, simply replace the existing dimmer module
• For installations where the RF signal is shielded, the product is fitted with a cable aerial which can be re-positioned to improve signal reach.

Wireless Dimmer Module 1 Zone - Single Colour RF Knob Remote Controller - Power supply options: 

1. 5-24VDC power supply
2. CR2032 battery powered (Please remove the protective film on the CR2032 battery before the first use).

CR2032 battery power is not recommended to be used at the same time as power supply 5-24VDC.

Wireless Dimmer Module 1 Zone - Single Colour RF Knob Remote Controller - Specs

• Output signal: RF (2.4GHz)
• Working voltage: 5-24VDC or 3VDC (CR2032)
• Working current: <5mA
• Standby current: <6μA
• Standby time: 1 year
• Remote distance: 30m (Barrier-free space)
• EMC standard (EMC): ETSI EN 301 489-1 V2.2.3
• ETSI: EN 301 489-17 V3.2.4
• Safety standard (LVD): EN 62368-1:2020+A11:2020
• Radio Equipment (RED): ETSI EN 300 328 V2.2.2
• Certification: CE, EMC, LVD, RED
• Warranty: 5 years manufacturer warranty
• Operation temperature Ta: -20°C ~ +45°C
• IP rating: IP20 rated
• Size: Length 110mm x Width 57mm x Height 28mm
• Gross weight: 0.042kg

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• RDSRF instructions.pdf (567.77 kB)