Rako RMS800 Wireless In-Line RF Switch Module for Non-Dimmable Loads up to 800W
£102.00
Ex. VAT(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Rako Controls RMS800 in-line RF switch module ideal for non dimmable loads. If it is connected in-line before the first lighting fitting, the Rako RMS800 enables switching of up to 800VA of non-dimmable loads. This in-line wireless switching module is ideal for extractor fans, LEDs, non-dimmable fluorescents. It can be controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.
Please note: this item is non-returnable; due to the fact that it has an electronic component, we cannot take this item back for a refund.
Rako RMS800 In-Line RF Switch Module 800W - Features
- It is designed to fit in a ceiling void or a cupboard.
- It can control up to 800VA of mains non-dimmable lighting loads.
- Can be used for exterior lighting applications when used with a weatherproof IP rated enclosure (ordered separately).
- 16 Scene memory capacity.
- Can be fully integrated with Rako wired systems.
- Easy to set up and manual ON/OFF control using the set-up button.
- Full rising clamp terminals. Mounting bracket. Easy to install.
- It can be programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory.
- Can be controlled from any other Rajo transmitter such as RCM/RCP wall-plates, RAH hand-helds, and Bridge modules.
- Forms the foundation of any Rako wireless scene-set system.
Rako RMS800 In-Line RF Switch Module 800W - Specs
- Dimensions: 138mm x 46mm x 40mm
- Input supply: 230V AC +/-10% 50Hz
- Weight: 205g
- Housing: UL V0 material
- Temperature: +2degC to +40degC
- Humidity: +5% to 95% non condensing
- Connections: 3 way screw terminals for mains power
- Protection: Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection
- Load types: All non dimmable lighting loads e.g. Extractor fans and water pumps.
- Minimum load: N/A
- Maximum load: 800VA
- Terminal sizes: 4mm2
- Emissions - EN61000-6-3 : 2001
- Immunity - EN61000-6-1 : 2001
- Communication: Rakom coded fm radio, 433.9MHz
- Memory: Flash memory (non volatile)
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.