Fluke Test Adapter Kit for EV Charging Station: Fluke 1886 + EV Test Adaptor Type 2 Connector, Fluke FLK-FEV300KIT
£1,360.00
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Fluke FLK-FEV300KIT, a Fluke Test Adapter Kit for EV Charging Station: Fluke 1886 + EV Test Adaptor Type 2 Connector available at Sparks for the best price. Fluke Test Adapter Kit for Electric Vehicle Charging Stations FLK-FEV300/KIT UK Type 2 Connector. You can now test the safety and functionality of electrical vehicle charging stations, easily and reliably!
The FEV300 Test Adapter Kits are designed to test function and safety of charging stations mode 3 for AC charging. The adapter imitates an electric vehicle and opens up a charging cycle (activating voltage/current output), allowing you to conduct tests in combination with appropriate test instruments like an installation tester (for example the Fluke 1664 FC) and/or an oscilloscope (for example the Fluke 120B Series Industrial ScopeMeter®). With the FEV300 Adapter Kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.
Fluke Test Adapter Kit for EV Charging Station: Fluke 1886 + EV Test Adaptor Type 2 Connector - Features and functions
- Suitable to vehicle charging stations with charging mode 3
- Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
- PE Pre-Test: With this safety feature the PE conductor will be tested for possible presence of dangerous voltage against earth.
- Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch the adapter can simulate various current capabilities of charging cables.
- Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector all charging states can be simulated.
- Separate phase indication by three LED lamps for easy check if voltage is present at the charging output.
- Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests.
- Compatibility: Integrates into Fluke portfolio of test and measurement tools, by allowing direct connection through FEV measurement terminals.
- The Fluke 1664 FC allows safety measurements via the measuring terminals like: earth bond, insulation, loop/line impedance, RCD trip test
- Simulation of CP error state “E”: Simulation of PE error state “F” (Earth fault), Terminals for CP signal output to check communication between adapter (simulated electrical vehicle) and charging station. This can be measured by a ScopeMeter® or multimeter. The voltage level defines the charging modes and the duty cycle of this PWM (Pulse Width Modulation) signal defines the maximum allowable charging current.
- IP 54 rating - Dust and splashing water protected
Fluke Test Adapter Kit for EV Charging Station: Fluke 1886 + EV Test Adaptor Type 2 Connector - Main Applications
- Safety testing of charging stations
- Functional testing of charging stations
- Troubleshooting/repair of charging stations
Fluke Test Adapter Kit for EV Charging Station: Fluke 1886 + EV Test Adaptor Type 2 Connector - Specifications
General features
- Input voltage: Up to 250 V (single phase system) / up to 480 V (three phasesystem), 50/60 Hz, max 10 A
- Internal power consumption: 3 W max.
- FEV300-CON-TY2 Plug: AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
- Dimensions (H × W × D): 110mm × 45mm × 220 mm length without connection cable and test cable
- Weight (including type 2 connection cable): Approx. 1 kg
- Safety standards: IEC/EN 61010-1, pollution degree 2, IEC/EN 61010-2-030, CAT II 300 V, protection class II, Ingress protection IEC 60529: IP54 (housing), IEC 60529: IP54 (measuring terminals with protection caps in place, connector/ plug in connected condition or with protection caps in place, otherwise IP20)
- Operating temperature: -20 °C to 40 °C
- Storage temperature: -20 °C to 50 °C
- Operating humidity range: 10 % to 85 % relative humidity non-condensing
- Storage relative humidity: 0 % to 85 % non-condensing
- Operating altitude: 2000 m max.
Functions
- PE Pre-Test: Visible indication >50 V AC/DC between PE conductor and touch sensor
- PP Simulation: Open, 13 A, 20 A, 32 A, 63 A
- CP States: State A, B, C, D
- CP Error state “E”: On/off (CP signal short-circuited to PE)
- PE Error state "F": (Earth fault) On/off (interruption of PE conductor)
- Outputs (for test purpose only)
- Measuring terminals L1, L2, L3, N, PE: Max. 250/480 V, max. 10 A
- CP signal output terminals: Approx. +/-12 V
Included in the kit: FEV300/BASIC Test Adapter + FEV300-CON-TY2 + 1664 FC Multifunction Tester + Soft Carrying Bag.
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
