2 Zone Conventional Fire Alarm Panel - FP585 75585-02NMB Control Panel (excluding batteries)
£109.99
Ex. VATThis item requires:
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is a two zone conventional fire alarm panel excluding batteries. The SMS FP585 75585-02NMB panel complies fully with the European standard EN54 Parts 2 & 4 and can be used on installations meeting BS 5839: Part 1.
Each panel contains its own integral power supply and battery support for up to two alarm sounder circuits, two auxiliary relay contacts, a zone disablement facility and a one man test and commission facility, all simplifying system design, installation and commissioning.
This 2 Zone Conventional Fire Panel complies fully with the European Standard EN54 parts 2 & 4 and can be used on installations meeting BS5839-1.
Main Features
- 75585-02NMB SMS 2 Zone Conventional Control Panel
- Number of Zones: 2
- Maximum Load Per Zone: 3mA
- Number of Sounder Circuits: 2
- Maximum Sounder Circuit Load: 0.5A per circuit (Total Load Not To Exceed 1A)
- Batteries (Not Included): 2 x 12V 2.1Ah (See Related Products)
- Battery Standby (Using Above Specified Batteries): 72 Hours plus 0.5 Hours Alarm Load
- Aux Relay Contacts: 1 N/O and 1 N/C Pair, 1A at 24V
- Approx Weight (With Batteries): 5.8Kg
- Relevant Standard: EN54 Parts 2 and 4
- Approvals: LPCB Approved to EN54 Parts 2 and 4
- Cable Entry: 13 Top and 13 Rear
- Cable Type: BS 6387, 2 Core, min 1.5mm Square CSA
- Class Change Facility: Via Normally Open Push Button Switch Located No More Than 100m From Panel
- Temperature: Indoor 0 - 40 Degrees Celsius
Consumer Units | |
Width | 395 |
Dimensions | |
Height | 274 |
Width | 87 |
Weight | 5.8kg |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.