3 Gang Momentary Switch/Dolly Antique Bronze: 1 Momentary Switch + 2 x 2 way Dolly Switches
This item requires:
(over £100+VAT, applies to zones A&B only, £6+VAT otherwise)
Order online & collect in store
This is the Forbes and Lomax 3G2TBELL/BMA, a three gang switch composed of one momentary switch and two way 20A dolly switches antique bronze plate, manufactured by Forbes and Lomax.
The Forbes and Lomax Dolly Switch
The Forbes and Lomax Dolly Switches are On/off Switches available in 2-way, Intermediate and double pole versions. Retractive dolly switches can be used as dimmer controllers when connected to a dimmer pack or dimming system. 2-way-and-off switches can be used to operate blinds.
The Forbes and Lomax dolly switches can be mixed with Button Dimmer Controllers on the same plate, however they can not be combined with rotary dimmers. The Forbes & Lomax dolly switches are available in: the Invisible Lightswitch® Range, the Antique Bronze Range, the Stainless Steel Range, the Aged Brass Range, the Unlacquered Brass Range, the Nickel Silver Range, and the Verdigris Range.
Technical Information - Forbes and Lomax Dolly Switch
- The Forbes and Lomax Dolly Switch Conforms to BS EN 60669 - 1: 1999 when assembled to appropriate plate and grid and
- installed correctly. ASTA Certificate No: 16240
- All Forbes and Lomax dolly switches require British standard 35mm deep flush wall boxes (to be ordered separately).
- Voltage: 250V AC, 50Hz
- Current rating: 20AX
- Terminal capacities: 4 x 1mm2 (Flex), 4 x 1.5mm2 (Solid), 3 x 2.5mm2 (Solid), 2 x 4mm2 (Solid), 1 x 6mm2 (Solid).
- Ambient Operating Temperature: -5 degrees to +40 degrees Celsius
- IP rating: IP2XD
- Max. installation altitude: 2000m
- No. of operations: 10.000
- Dimensions: 1-2 gang rocker switch 86mm x 86mm; 3-4 gang 146mm x 86mm.
The Forbes and Lomax Button dimmers
- Standards, Approvals & Directives: Button dimmer Conforms to BS EN 60669 - 1: 1999 when assembled to appropriate plate and grid and installed correctly. ASTA Certificate No: 16240
- Button dimmers are manufactured from brass and finished to complement or match the cover plates.
- They feature a solid brass button
- All products clearly printed with BSNo’s, ratings, etc
- They are contact-closure momentary switch
- Button dimmers are screwed to appropriate grids.
- All the Forbes and Lomax buttons are available in the complete range of plate finishes: Unlacquered Brass, Antique Bronze, Stainless Steel, Polished Nickel, Verdigris and Invisible.
- Supply voltage: 250V AC, 50Hz
- Current rating: 4A
- Ambient operating temperature: -5 degrees to 40 degrees Celsius
- Max. installation altitude: 2000m
- IP Rating: IP2XD
- No of operations: 40.000
- Terminal capacity: 3 x 1mm (Flex), 2 x 1mm (Solid), 2 x 1.5mm (Solid), 1 x 2mm (solid), and 1 x 2.5mm (Solid).
- Button dimmer dimensions: 23mm width x 50.3mm height x 30.5mm depth.
- Invisible plates and rocker switches with 2mm thick acrylic plates complete the range.
- The Forbes and Lomax Momentary / contact closure switches require an in-line dimmer pack to enable them to work as a dimmer. They can be used for lighting control and home automation systems. The dimmer pack has to be located in an accessible void, out of earshot; any noise generated when dimming will come from the dimmer pack - no noise will be emitted from the switch itself.
- You can achieve multiple switching locations on one lighting circuit by wiring the buttons in parallel; all the locations must have momentary controls, and each location can be used to dim. However, you cannot use normal switches on the same circuit as the button dimmer.
- To use a momenary control as a simple ON/OFF switch, you need to put a link to the in-line relay pack.
Please note: The button dimmer / momentary switch will only work in conjunction with an inline dimmer (see the required items). The way it works is: one in-line dimmer (impulse dimmer) per button dimmer. For 50-1000W 4A dimming you can order the ID0401 and for LED dimming you can use ID0101LE.
The Antique Bronze Range from Forbes and Lomax
- Many of the early light switches were made in Antique Bronze and the finish became very fashionable in the Art Deco period.
- This finish complements both traditional and modern designs and work particularly well on wood panelling and other unusual surroundings.
- The Antique Bronze range is durable and will stand the test of time. Original Antique Bronze switch plates can be seen in old buildings today still looking great a hundred years on.
- Sockets are supplied with black inserts as standard to complement the dark finish of the plate.
|Switches & Sockets Specific|
|Back Box Depth||35mm|
|Brand||Forbes and Lomax|
|Plate Dimensions||146mm x 86mm|
Need more detailed specs?
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.