Hager JK11004S 100A 4 Pole Mains Switch Incomer Kit, Four Pole Switch Disconnector / JK1 Isolator Kit

This is the Hager JK11004S 100A 4 Pole JK1 Switch Incomer Kit. It is a Hager Invicta 3 Incomer Isolator Kit / mains switch disconnector, 4 pole, rated at 100A.

This kit contains: 1 x terminal shield, 1 x SB499 100A 4 Pole modular switch and DIN rail, 4 x Incomer L1, L2, L3 and Neutral (to fit M6 stud link), 3 x M5 carp nuts, 1 x M6 carp nut. 

It will only fit Hager 125A boards. Suitable for use with Hager Invicta 3 Phase 125A Distribution Boards

Installation Instructions

• Locate the income switch (A) onto the left side of the Din rail (B), and fit the L1, L2 and L3 incomer links. Ensure that the links' teeth are within the top terminal of the incomer switch.
• Ensure the cranked neutral link (C) is inserted into the left most termination on the incomer switch and use the M6 carp nut to secure to the neutral cross link. Use the M5 carp nuts for the phase connections. Ensure that all terminal connections on incomer switch (D) connections are tightened to 3.5Nm. Ensure the connections on the busbar links (E) are to 5Nm (3 x Phase and Neutral). 
• After terminating incoming cables fix the main incomer shroud (F) to the clip in fixing points (G). Remove additional breakout left of the shroud to ensure the switch protrudes through the main incomer shroud.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• JK11004S-data.pdf (171.9 kB)
• JK11004S-instr.pdf (1.05 MB)