Hager Design 14 Way Metal Consumer Unit 100A Switch Disconnector Incomer (Amendment 3 Compliant)
This is the Hager Design VML114 Metal LA Consumer Unit 14 Way 100A Switch Disconnector Incomer, fully compliant with Amendment 3 to BS 7671:2008. This enclosure comes supplied with a full metal DIN rail, 100A switch disconnector incomer, and full complement of earth and neutral terminals along with marking labels, busbar and instructions.
Dimensions: 240mm height x 362mm width x 83mm depth
Hager VML114 14 Way Metal Consumer Unit
- Complies with BS EN 61439-3 Annex ZB.
- Amendment 3 to BS 7671:2008
- Dimensions: 240mm height x 362mm width x 83mm depth
- Model: Hager VML114 Metal LA Consumer Unit 14 Way 100A Switch Disconnector Incomer
- Multiple fixing points
- No restrictions under the DIN rail
- Cable entries positioned for easy access to devices
- Cable entry protectors to prevent damage to cable caused by sharp edges
- Rear cutouts optimised to give neater installation
- Terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A
- "Snap-able" bus bar means one less tool and speeds up install
- Amperage: 100A switch disconnector incomer
Amendment 3 to BS 7671:2008
This Hager Design consumer unit complies to the 3rd amendment of the 17th edition, which specifies that the consumer units and similar switchgear assemblies within domestic (household) premises shall comply with BS EN 61439 3 and shall have their enclosures manufactured from non-combustible material, or be enclosed in a cabinet or enclosure constructed of non-combustible material and complying with Regulation 132.12 (see the third amendment to BS 7671:2008, 421.1.201).
The third amendment to BS 7671:2008 was issued in January 2015 and is intended to come into effect on 1st July 2015. Installations designed after 30th June 2015 are to comply with BS 7671:2008 incorporating Amendment 3, 2015.
About Hager Design 10 Consumer Units
The Hager Design 10 range is the entry level compliant board, designed for functionality and simplicity. As with all models in the range, there is maximum cable space available, even when a Residual Current Circuit Breaker with Overcurrent protection (RCBO) is fitted. It also has a top mounted terminal rail to make the wiring of the neutral and earth connections neat and simple, multiple fixing points, and a full metal DIN rail to ensure the devices sit square and securely. Additionally Design 10 also includes cable entry knockouts designed to accommodate 25mm x 40mm, 50mm x 50mm, 100mm x 50mm trunking which allows access to the board when surface mounting cables.
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.