Want to view product prices with or without VAT?

VAT Off
Sale Icon
Review Icon
Free Delivery Icon

Hager VML202 Design 2 Way Metal Consumer Unit 63A Switch Disconnector Incomer Hager Fuseboard Amendment 3 Compliant

Model No. VML202 by: Hager
Availability: Usually 2 - 3 Days

£53.17

Ex. VAT
List price £106.34
You save £53.17!
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store
Ask A Question

This is the Hager Design VML202 Metal LA Consumer Unit 2 Way 63A Switch Disconnector Incomer, fully compliant with Amendment 3 to BS 7671:2008. This enclosure comes supplied with a full metal DIN rail, 63A switch disconnector incomer, and full complement of earth and neutral terminals along with marking labels, busbar and instructions.

Dimensions: 240mm height x 147mm width x 83mm depth

Hager VML202 Two Way Metal Consumer Unit

  • Complies with BS EN 61439-3 Annex ZB.
  • Amendment 3 to BS 7671:2008
  • Dimensions: 240mm height x 147mm width x 83mm depth
  • Model: Hager VML202 Metal LA Consumer Unit 2 Way 63A Switch Disconnector Incomer
  • Multiple fixing points 
  • No restrictions under the DIN rail 
  • Cable entries positioned for easy access to devices 
  • Cable entry protectors to prevent damage to cable caused by sharp edges 
  • Rear cutouts optimised to give neater installation 
  • Terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A 
  • "Snap-able" bus bar means one less tool and speeds up install
  • Amperage: 63A switch disconnector incomer

Amendment 3 to BS 7671:2008

This Hager Design consumer unit complies to the 3rd amendment of the 17th edition, which specifies that the consumer units and similar switchgear assemblies within domestic (household) premises shall comply with BS EN 61439 3 and shall have their enclosures manufactured from non-combustible material, or be enclosed in a cabinet or enclosure constructed of non-combustible material and complying with Regulation 132.12 (see the third amendment to BS 7671:2008, 421.1.201). 

The third amendment to BS 7671:2008 was issued in January 2015 and is intended to come into effect on 1st July 2015. Installations designed after 30th June 2015 are to comply with BS 7671:2008 incorporating Amendment 3, 2015.

About Hager Design 10 Consumer Units

The Hager Design 10 range is the entry level compliant board, designed for functionality and simplicity. As with all models in the range, there is maximum cable space available, even when a Residual Current Circuit Breaker with Overcurrent protection (RCBO) is fitted. It also has a top mounted terminal rail to make the wiring of the neutral and earth connections neat and simple, multiple fixing points, and a full metal DIN rail to ensure the devices sit square and securely. Additionally Design 10 also includes cable entry knockouts designed to accommodate 25mm x 40mm, 50mm x 50mm, 100mm x 50mm trunking which allows access to the board when surface mounting cables.

Dimensions
Height 240mm
Width 147mm
Depth 83mm

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Ask a question

Note: HTML is not translated!

Introducing MK and Hager Amendment 3 Compliant Consumer Units at Sparks

After speaking of the 3rd Amendment to the 17th Edition Regs (which came into full application in the beginning of 2016), we need to pay attention to what kind of consumer units we install in new built properties, HMOs, or when we replace a consumer unit. The main considerations with these new boards is the protection against thermal effects (protection against fire) for a longer period of time and the protection against electrical shock (via an RCD). It used to be that the consumer units could use a plastic enclosure, but starting from the 1st of January 2016 ALL the consumer units installed have to be of metal and need to have an RCD protection. Most of the consumer unit manufacturers came out with a range of Metal Consumer Units (RCD protected, fireproof), and in this article, we would like to introduce some of the most popular ones from MK and Hager. MK 10 Way Metal Consumer Unit (Amendment 3 Compliant) - Best Value for Money! The MK Sentry K7666sMET consumer unit is a 17th Edition Amendment 3 compliant metal board, a 16-way enclosure with 10 useable ways. It comes fully populated with 10 MCBs (3 x 6A, 2 x 16A, 4 x 32A, 1 x 40A) and it has a 100A switch disconnector.This metal consumer unit has a stylish design, curved, and it makes full use of the floating bus bar system, offering you ample wiring space. This unit comes in a white colored metal and comes pre-fitted with a switch disconnector and RCD together with all the necessary split-load cabling. The flexible design allows you to position the RCD to suit the required configuration. At Sparks this MK board is now at a reduced price - it is the best Amendment 3 consumer unit value for money! Hager Design 10 Consumer Units - Reliable and Supportive Hager came out with quite a few ranges of consumer units to comply with the third amendment to the 17th edition regulations, one of which is Hager Design 10. This range is designed for safety, installation, and aesthetics, and it is reliable and supportive. Here are some of the key points concerning these Amendment 3 compliant boards: Cable Space - Maximum cable space is available even with RCBOs fitted to make installation easier. Terminal bar - The top-mounted terminal rail makes the wiring of the neutral and earth connections neat and simple. Fixings - Multiple points allow the use of No.8 or No.10 fixings giving a range of fixing options. Full metal DIN rail - Minimised distortion to ensure the devices sit square and are not easily displaced. Snap-able busbar - Provides quick and easy configuration of circuits. Enjoy a video presentation of this great range from Hager below:  See the entire range of Hager Design 10 - from 2-way to 20-way boards (all of them Amendment 3 Compliant and with 63A/100A switch disconnector incomer) at Sparks.

What are the Features and Benefits of the Hager Consumer Units?

We have noticed a video recently put online by Hager outlining the main features and benefits of their consumer units, and after watching the 1.07 min video we thought that our readers and customers would also benefit from watching it. We have spoken extensively about the Hager Domestic and Commercial Consumer units on our blog, but there's always something new and special that we find out about them.Update: the video has been made private by Hager, but the main benefits and features of these boards from Hager still stand Hager Consumer Units - Features and Benefits When we talk about the consumer units from Hager, we mean especially the domestic distribution boards. Take a look at this short video and don't forget to read the comments below.  Removable Top Wall - removes easily to provide cable access and re-seals to IP4X when used with the two foam strips provided. Cable Space - maximum cable space is available even with the RCBOs fitted so that the installation and the wiring would be much easier. The Terminal Bars - the top-mounted terminal rail makes the wiring of the neutral and earth connections easier and neater. Meter Tail Kit - an optional meter tail kit is available to make the wiring and termination on the incoming cables easier to install. Snap-able Busbar - a snap-able busbar provides a quick and simple configuration of the devices. You can purchase Hager Domestic Consumer Units via Sparks - or read more on our blog concerning these devices.

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.