IP65 10W 2700K Fire Rated Downlight 750lm White with White Baffle Dimmable Anti Glare FossLED Iris FL410-00-3G4R

This is the IP65 10W 2700K Fire Rated Downlight in White with White Baffle Dimmable Anti Glare FossLED Iris FL410-00-3G4R available at Sparks Electrical Wholesalers for the best price. 

Note 1: to make this fitting into a plastered-in fitting, that is, to plaster this fitting into the ceiling before the final skim, you need to purchase SPAPLKIT separately.
Note 2: you can separately order a coloured reflector for this fitting - see the Gold, Silver, Black, and White reflectors.

The IRIS Antiglare is our versatile and yet elegant Fire Rated LED Downlight, featuring a multitude of Power Outputs, Kelvin and dimming protocol variations.

This unit has been designed with Antiglare at the forefront of its design with its set back reflector, producing a low glare and superior visual comfort.

At a Colour rendering Index (CRI) of 95+ the IRIS offers as a crisp light in any output which in turns enhances the appearance of colours and objects it comes into contact with.

10W 2700K Fire Rated Downlight in White with White Baffle Dimmable - Specs

• Cut Out: 68-70mm
• Height: 75.5mm
• Diameter: 80mm
• Lumen output: 750lm
• Colour temperature: 2700K warm white
• Beam angle: 40 degrees
• Dimming protocol: mains voltage dimmable
• Wattage: 10W
• 30, 60 and 90 Minutes Fire Rated
• IP rating: IP65 Rated, suitable for bathroom Zones 1, 2 & 3
• Insulation coverable
• Unified Glare Rating
• Mains, 0-10V & DALI Dimmable
• Colour Rendering Index 95
• Type: Antiglare - White on White

10W 2700K Fire Rated Downlight in White with White Baffle Dimmable - Safety

• The fossLED IRIS LED Downlight has been made with Antiglare at the forefront of its design with its setback reflector, producing low glare and superior visual comfort.
• Fire Rated to 30 minutes, 60 minutes and 90 minutes when installed in ceilings of approved construction to BS 476:Part 21:1987.
• IP65 dust and moisture sealed from the front when installed correctly.
• This fitting is compliant to Building regulations Part B, Part C and Part L.
• This product must be installed by a qualified electrician in accordance with instructions provided and in compliance
• with recognized electrical and safety regulations relevant to the country it is being installed.
• This product is insulation coverable when assembled with fossLED 10W and 12W driver variations ONLY.
• This product is for indoor use only.
• Minimum clearance is 50mm above the installed fitting and should NOT be installed within 200mm of any joist.
• Avoid the installation of cables in locations that would cause a hazard. Position cables away from areas where there may be at risk of them being trapped, damaged or cut.
• This product is suitable for coverage by thermal and acoustic insulation e.g. loft insulation. Not suitable for blown insulation.
• Baffle Colour Selection: Choose from additional Black, Gold or Silver Bafe covers (to be ordered separately)
• Easy Installation: Mains Loop-in and Loop-out Driver feature on Standard & Mains Dimmable Models
• High CRI & Antiglare: A set back reector for a low glare rating coupled with a powerful & Crisp light engine to help enhance the appearance of colours & objects
• UKCA: Compliant to all applicable UKCA Directive requirements.
• CE Mark: Compliant to all applicable EC Directive requirements.
• Do NOT directly mount this product on normally flammable surfaces. The product should be mounted on non-combustible surfaces.
• A minimum distance of 0.5 metres from lighted objects.
• The power supply is double insulated and so does not require an Earth connection. 
• This product is suitable for use in living areas, Bathroom Zones 2 and outside zones.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• SPABAFWW instructions (628.98 kB)
• SPABAFWW datasheet (426.75 kB)