Sale Icon
Review Icon
Free Delivery Icon

106mm Round Fire rated IP65 GU10 Trimless Fixed Downlight White Plastered-in FossLED FD04P-00 80mm Cutout

Model No. FD04P00 by: FossLED
Availability: Usually 3-5 days


List price £21.20
You save £6.35!
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

This is a 106mm Round Fire rated IP65 GU10 Trimless Fixed Downlight in White Dimmable FossLED FD04P-00 80mm Cutout - an ICON Trimless Fire Rated GU10 Downlight in White available at Sparks Electrical Wholesalers for the best price.

The FossLED Icon GU10 offers a modern minimalist design that naturally blends into any environment. Pressed in steel and composed of fire rated glass allows this unit to have a very low profile, making it quick and easy to install, whilst offering improved ventilation to your LED bulb and in turn improving its lifespan.

106mm Round Fire rated IP65 GU10 Trimless Fixed Downlight White - Features

  • Plastered-in downlight: to be plastered in before the final skim.
  • Easy Access Housing: Removable twist and lock system allowing for easy lamp access
  • Easy Installation: Loop in and out push in fast connector
  • Low Profile: Constructed using fire rated glass allowing for a low profile and improved lamp ventilation
  • Fire rated: 30, 60 and 90 Minutes Fire Rated
  • IP rating: IP65 Rated, suitable for bathroom Zones 1, 2 & 3
  • Insulation Coverable when an Insulation Guard is installed
  • Mains Voltage powered
  • Dimmable: Mains Dimmable when a suitable lamp is installed
  • FossLED open construction fire rated glass fixtures feature a low profile for installation versatility and good air circulation for improved lamp lifetime.

106mm Round Fire rated IP65 GU10 Trimless Fixed Downlight White - Specs

  • Fixed downlight, non-tilting
  • Model: FossLED FD04P-00 GU10 Trimless Downlight
  • Light Source: LED GU10 (not included). The lamp needs to be ordered separately
  • Cut Out: 80mm
  • Diameter: 74mm
  • Height: 39mm
  • Plaster In frame: 106mm x 87mm
  • Finish: white on white
  • IP rating: IP65 dust and moisture sealed from the front when installed correctly.
  • This fitting is compliant to Building regulations Part B, Part C and Part L when used in conjunction with high efficiency LED lamps
  • This product is for indoor use only.
  • This light fitting should be connected to a circuit with a 30mA RCD when fitted in a room containing a bath or shower.
  • Minimum clearance is 50mm above the installed fitting and should NOT be installed within 200mm of any joist.
  • Fire rating: Fire Rated to 30 minutes, 60 minutes and 90 minutes when installed in ceilings of approved construction to BS 476: Part 21:1987.
  • This product must not be used with non-LED lamps and installed with a max lamp wattage of 7W.
  • Compatible Insulation Bracket: IC03, to be ordered separately improved lamp ventilation
Lights Specific
Base GU10
Colour White
Dimmable yes
Electrical Rating Class 2 - Double Insulated
Energy Type Mains Voltage 240V
Fire Rating 30, 60 and 90 minutes
IP Rating IP65
Lamp Style Contemporary
Lamp Type LED Light
Light Color Lamp Dependant
Lumens Lamp Dependant
Number of Lamps 1
Projection 39mm
Rooms Bathroom
Tasks Downlight
Total Wattage 7
Wattage 7
Zone Rating 1, 2, and 3
Range Icon Trimless Fire Rated Downlights
Cutout 80mm

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Trimless Lights Guide: What Plastered-in Light Fitting do I Need?

A trimless light fitting is a plastered-in fitting, a light fitting that has "no trim" because it is "buried" in the ceiling or wall, shedding light in a seamless way without any round / square edge around it. Some people prefer to clearly see the light fitting, so a chrome downlight would be great. Other people would rather not see the bezel of the fitting, so a plastered-in / trimless fitting would be the best solution. If we were to focus on the plastered-in or trimless light fittings, the question is, what kind of trimless light fitting do you need for the wall or the ceiling? Astro Lighting put out a schematic guide to their trimless fittings, and we will try to explain it or unpack it in laymen terms. When installing a trimless light fitting before the surface is plastered, and the fitting is fixed into the plasterboard or masonry, there's a wide range of wall or ceiling trimless fittings. You can use one of Astro's metal trimless luminaries such as the Trimless downlight, the Borgo trimless, Volos Trimless, Leros Trimless, or Olympus Trimless.Buy Trimless Lights at Sparks Regarding the Astro Lighting metal Trimless fittings it is important to note that: These are designed to be fitted into a plasterboard or brick, and then the surface is skimmed over with plaster, which covers up all the fixing flange. The thickness of the mounting surface is not as critical as the flange of the product fixes to the outside surface and this flange is then covered in plaster. There's a metal edge on the metal Trimless fittings, which the plasterers can skim up to and leave a clean edge. If you are installing into a pre-plastered surface and you're intending to fix the trimless fitting into the masonry, you will need to bear in mind that you have to re-plaster the wall or ceiling. If that's alright with you, you can use one of the Trimless downlights or ceiling lights, such as the Trimless downlight, the Borgo downlight, Leros trimless, or Olympus trimless. If you are installing the trimless light fitting into a pre-plastered surface and you want to fix it into the plasterboard, then you can simply use one of the plaster trimless luminaries from Astro Lighting. Trimless plaster fittings such as Astro Blanco downlights, Leros Plaster, and Olympus plaster are great to be installed on the ceiling or on the wall, as needed. When installing the Astro Plaster Trimless light fittings such as Blanco downlights, and Leros and Olympus wall lights, it is important to know that, The plaster light fittings are designed to be fitted into a surface that is already plastered, and then the gap between the fitting and the surface is filled and made good. The trimless plaster light is adjusted to match the thickness of the plasterboard so that the surface of the product is flush with the surface of the plasterboard. This is done simply by bending the perforated metal tabs. There's no edge to which you skim up to; the gap is filled, and then it is rubbed down to a smooth finish before painting. Always remember: the trimless plaster light fittings are suitable only for fitting into plasterboards. Do not install these into masonry or brick. Both the Trimless downlights / wall lights and the plaster trimless light fittings from Astro can be purchased on our website - simply follow the links supplied above. Buy Trimless Downlights


Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.


We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.